Panasonic Repair Tips

Search: panasonic
Results: 2900

Make	Model	Symptom	Problem	Solution	By
PANASONIC	TC-29G11	TV activates relay but does not turn on, LED remains on.	Open zener diode 602. replace with a general use or make a jump.		MANTENOPOLIS
PANASONIC	TC-21FJ32L		PC860 photo sensor next to the power supply driver in the test was good, replaced it and solved the problem		fabiusmax
PANASONIC	KL05	Doesn't start	L c394	Replace of the same	misso
PANASONIC	GT-1422	Doesn't start	B+ shorted to ground def. power supply c823 471/1kv shorted		ELETRONICA ARNI - L. LEAL
PANASONIC	TC14C06	Just catching channel 02 with drizzle	R1186 (180r) aberto		Luciano Fontes
PANASONIC	20G9 BRD1	Blowing the power supply fuse	10k open resistor r-833	Replace the resistor	edsontadeu
PANASONIC	TC20A7	Dead	C652 de 680pf x 2kv alterado		Jaison
PANASONIC	14A10 MX5	I didn't tune in to cable channels	Varicap replacement		sergio luiz
PANASONIC	14RM10L	Blocked channel,	Press volume- on the panel and sleep on the control		beto2828
PANASONIC	TC 1404 A	TV works normally +or- 30 minutes later protection works by unplugging it from the socket and starts working again for a little longer and the protection activates again	C559 7n5 x1600v		Rolf Thomas This email address is being protected from spambots. You need JavaScript enabled to view it.
PANASONIC	TC-20A12	When turned on, the TV oscillated and gave normal sound, but tsound was no high voltage.	I checked everything was normal. I went to the bus and found that it did not collect the voltage from the faly back but did not emit it.	It was raw solder on the bu emitter, I resoldered it and it was fine	This email address is being protected from spambots. You need JavaScript enabled to view it.
PANASONIC	14C6	TV makes a buzzing sound at the power supply and doesn't oscillate without +b on the horizontal output	Replaced d 835 short		jaironuness
PANASONIC	TC-20A12 TZGNPAL20A12	When the TV is turned on, it has normal sound, but not the image, it oscillates but not the voltage.	Flayback kft3aa428f, and I just change it and go for the hug		This email address is being protected from spambots. You need JavaScript enabled to view it.
PANASONIC	SA-AK230	When turned on, f61 appears on the display	Dz 5808 5v6 short		Daniel
PANASONIC	TC-14A12	Tv turning off	R 631 of 560k open		Daniel
PANASONIC	TC14A10 MX5	Inoperative - after several tests, zero voltages were found on the ic 401, the power supply pins were raised and the voltages returned to normal, the TV turned on and came back with the vertical closed. The ci was replaced and it started working again.	Replace ic 401 la 7840		Jaison
PANASONIC	TC-20C4	TV without green in colors predominates red and blue	Changed at r- 330 hms on the tube plate.		jaironuness
PANASONIC	29"	TV when you turn it on it makes noise and for the LED it reduces its intensity and the power supply becomes low because you keep trying to turn it on and off it ends up working normally I would like to ask my friend for a tip!	Thanks for your attention, thanks		francisco
PANASONIC	TC-14A12	Protection	Q401 e r401		alan
PANASONIC	TC-20C7	Alloy does not oscillate, kills 90v	Ic 401 la 7837 vertical	I replaced it and it worked normally	Eronaldo