Panasonic Repair Tips
Search: panasonic
Results: 2911
Results: 2911
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PANASONIC |
TC-14A10
|
Drizzle in the image | R106 | ||
| PANASONIC |
CT-1110
|
When you turn on the TV, only a horizontal line appears (closed vertical). | The ic-401 was replaced and the problem was corrected. | elmexicano | |
| PANASONIC |
TC-21FX30
|
Image only at the top and turns off after seconds | R405 - 56k | Andrade Sequeira | |
| PANASONIC |
20A12
|
Stand by is blinking | It doesn't turn on and it makes a noise | Replace fly back | eletronica video som |
| PANASONIC |
TC-20G9
|
Vertical closed | C405, c406 smd | ||
| PANASONIC |
TC-20G9
|
Does not turn on, makes noise protection | D602 | ||
| PANASONIC |
TC-20G9
|
Power on, no osd, dark screen | Q2303, ic2202(reg.9v) r555 aberto | ||
| PANASONIC |
TC-21FX30
|
Turns off after a few seconds with a dot on the screen | As a testimonial | ||
| PANASONIC |
TC-20G7 TC-21V50
|
Queima stk73907-t | When replacing the ic801- stk73907-t, the changes as described below: 1. Replace the printed circuit STK. add thermal paste and secure it firmly on the heatsink. 2. add a 130pf / 3.6m capristor? between each ac line with cold ground. solder the capristors underneath the printout and Glue them with silicone or hot glue. 3. Add a 10NF capacitor in parallel with c805. solder the capacitor underneath the printout and glue it with silicone or hot glue. 4.Add an insulated wire jumper between point A13 and tuner ground. | ||
| PANASONIC |
CHASSI BR2
BR2 |
Pronounced cushion effect | To improve the pin-cushion effect, change the following SMD components; 1)r758 from 18 kΩ to 39 kΩ; 2) r 759 from 2.2 kΩ to 1.5 kΩ | ||
| PANASONIC |
TC-20A10
|
No audio | Microprocessor pin 14 short | ||
| PANASONIC |
20A10
|
TV doesn't turn on | Cristal do micro | ||
| PANASONIC |
TC-29FJ30 L
|
Pinchusin doesn't work | Ic601 | ||
| PANASONIC |
TC-14A12
|
Dead | R864 changed | ||
| PANASONIC |
TC-29KL04
|
Closed horizontal | C 563 | ||
| PANASONIC |
TC -20A12
|
Flashing on std-by | R631 560k | ||
| PANASONIC |
SA-AK18
|
I'm sound | R546 open | ||
| PANASONIC |
TCT-14TR-1
|
Both works and doesn't work | C813 | ||
| PANASONIC |
TX-21MD3E
|
Video and sound blocked. tsound is only osd | L202 located in the module attached to the tuner | ||
| PANASONIC |
TX29AD10F -EURO 2S?
|
Only lights up led, q6241 buz91a in dc. at the power supply. | Replace the buz91a and r625 330k (changed to 750k). |