Philco Repair Tips
Search: philco
Results: 4775
Results: 4775
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILCO |
PH21US
|
When it heats up, the sound crackles | N703 zener 33 v | Replace | ELETRONICA MAURI JUNIOR |
PHILCO |
TVPH21SS
|
Very dark image, even with the brightness fully turned on | Change the electrolytic capacitor c 569 of 22 uf by 250v of the +b of 180 v, for a 4.7uf by 250. | Ita | |
PHILCO |
PH 21 USA1
|
Turning off by itself and noise in the sound | V502 and n 703 with leak | V502 transistor 2sc 2383 = diodo n 703 zener 33v | ELETRONICA MAURI JUNIOR |
PHILCO |
TPF294F
|
With protection activated and little noise in the transformer. | Cold solder on pci deflection h | Just resolder with a good soldering iron and blue solder. good luck!!! | Jhone eletronica |
PHILCO HITACHI |
PC-1613
|
He called whenever he wanted. If it turned on there would be a buzzing sound at the power supply. | C911, with small leak | Replace c911 and check all the power supply capacitors. | LM |
PHILCO |
PH14-PH21-PH29
|
Menu stuck | When asked for the password, type 4711 | Go to "child lock" and deactivate | paulorusso |
PHILCO |
PH14E
|
Doesn't start at all | Tea1533p defective, I put a tea1507p and it worked perfectly | paulorusso | |
PHILCO |
TV PH29 VERSãO A
|
Turns on and starts making noise on the flyback and turns off | Capacitor 680pf 2kv c450 ao lado do flyback | eletroademar | |
PHILCO |
PH21US
|
Doesn't start | 1000x25v capacitors at the power supply output | Replace all 1000x25v | ELETRONICA MAURI JUNIOR |
PHILCO |
PH14B
|
No picture, normal sound | Press the at key on the original remote control | If the image appears, disable the at enable function in services mode | paulorusso |
PHILCO |
PH21B
|
No picture, normal sound | Press the at key on the original remote control | If the image appears, disable the at enable function in services mode | paulorusso |
PHILCO |
PH29B
|
No picture, normal sound | Press the at key on the original remote control | If the image appears, disable the at enable function in services mode | paulorusso |
PHILCO |
PH29B
|
Normal image, no sound... | C833 e c829 de 1000uf 25 v | In my case, the c833 was stμFfed, I replaced it and the sound came back normal. | vilenon |
PHILCO |
PH29B
|
Power supply does not arm, in this case there is only primary power supply and not secondary | Q806 ,bc1815 with small leak. | Replace it without testing and the power supply will arm... | vilenon de oliveira |
PHILCO |
TV PH 21A
|
Normal image but no sound | V173 changed | sandro | |
PHILCO |
TP2054
|
Inoperative /led blinks weakly with little brightness | Zd906 altered! | orlando lott | |
PHILCO |
TPF29S4F
|
When you press the power key, the power supply goes off for a few seconds, then disarms and activates the protection | Check capacitor c1703 | Replace the same | Mario Teilor o da penha |
PHILCO |
TPF29S4F
|
Hitting relay | Open resistor r919 | Replace the same value 120k 0.4w metal | Mario Teilor o da penha |
PHILCO |
PCS 2976
|
Cap. 715 (2k2 / 1600v) aberto | |||
PHILCO |
PH21C
|
Power supply pulsating flashing led | Ic803 (tl431)com flake | Replace the same | jean alves |