Philco Repair Tips

Search: philco
Results: 4811

Make	Model	Symptom	Problem	Solution	By
PHILCO	PCM-1451	It takes a long time for the image to appear	Screen low	Regular screen	ELETROCLAUDIO AGUAS BELAS
PHILCO	PCM2046	Works for a short time, screen goes dark, closes vertically	Ic701 9v regulator, replacement without testing	Under test shows good condition	apolo tres coraçoes m.g.
PHILCO	PCM2046	The moment it turns on, 0.9v appears on pin 4 of ic 901 and then ov. I isolated pin 4 and now I have 95v, without load.	After much research, faulty ic901 (str50103).		Ademir tc
PHILCO	TP2053	When it turns on, a line appears on the screen and turns off, sometimes it works, the screen lights up, but some white lines appear like feedback, it activates the protection and turns off.	This defect has the characteristic of horizontal or abl, but being at the power supply, high above 118v.	R 919 of 120k replaced. replace it and solve it.	WAGGUINHO
PHILCO	PCS 2956N	Arms and disarms when testing the horizontal transistor was shorted, I changed it, it continued to disarm	I replaced the horizontal transistor again it worked normally	It was the transistor with a factory defect	carlos df
PHILCO	PCM1446	Functions locked (not channels, volume and does not accept remote c.)	One of the microswitches leaks or has a short circuit		CMS Eletrônica Jd.paulista Pe.
PHILCO	PCM 2046	TV turns on but no drizzle, smooth screen,	At 501 TDA 8361 .	I replaced the integrated one and it was resolved	digitec eletronica
PHILCO	PCM 2046	Image ok, no sound, just a high-pitched whistle from the speaker	C-720 = 47uf x 25v		FERNANDO S
PHILCO	TPF2121	Noise at the power supply and it won't turn on	C 936 smd from the power supply, cracked		MASTER ELETRONICA
PHILCO	PCS-2976	No audio, sometimes audio appears little by little	Eeprom memory	Reschedule	ELETROSONIC
PHILCO	TP 2052N	TV turns on, passes on average between 1 minute and 2 hours on then turns off by itself	Note: pin 1e2 of ic 601 that connects to pin 46, 47 of ic 501 - -driver + driver, shorting out, replace ic 501 (tda - 8842 2y)		BARRETO CRUZ
PHILCO	TP 2052N	Straight and thin line lying in the center of the closed vertical kinescope(tube)	Replace ic - 501 (tda- 8842 2y )		BARRETO CRUZ
PHILCO	PCR - 2049	Turn on the TV, the LED lights up then turns off but it doesn't turn on	Change without measuring c- 708,704 de471k/2kv - c709 de 152k/2kv and c- 913 de 1uf/100v		BARRETO CRUZ
PHILCO	TPF2130	Blocked channel	General password 7685	Type 7685 and then enter the menu and deactivate the function
PHILCO	PC 1444	TV kept blurring the image and interfering with the sound (squeaky)	Ceramic capacitor c 203 on the fi line, shorted	Replace capacitor	afonso Eletronica taquari
PHILCO	TP-1452N	TV does not work when turned off and making noises at the power supply	Capacitor,position,c913=1mf/50v	I replaced it and plz	ELETRONICA MEDEIROS
PHILCO	PCM 1444,1446,2044,2046	Works normally with screen and LED blinking like a solution	R713 100k open	I replaced it and resolved	antonio dos santos lima
PHILCO	PCM-1444 -1446 -2044-2046	Running away from color, sometimes you want to scroll vertically but it's not enough to scroll the image half tremola	C205	I replaced c205, 208, 702 solved	antonio dos santos lima
PHILCO	TPF29S4F	It doesn't turn on, it just stays on stdby, sometimes it sets up the power supply and sometimes it doesn't work, it seems like a bad contact but it isn't.	3.3v low supply	Substituir q903(bc337-25) e zd902(zener 4,7v)	NARDINHO
PHILCO	PCS2952 CPH06	Activating the protection and then turning it off and with +b180v with 260v	Causes depleted width capacitor c711 and c712		klein