Philips Repair Tips
Search: philips
Results: 14206
Results: 14206
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
39PFL4707G
|
It would turn off by itself, sometimes the sound would disappear, it would creak before turning off. completely crazy. | Update the software | ||
| PHILIPS |
39PFL4508G
|
Doesn't start. sometimes it even turns on | Pin 4 of the rt8288a ci raised and placed a 100nf capacitor on pin 3 | ||
| PHILIPS |
39PFL3008D
|
Turns on, the backlight turns on, but tsound is no image. power supply voltages (715g6050-p02) normal. | Ic up1 (cm501). In some cases, heating the ci with hot air solves the problem. | ||
| PHILIPS |
32PFL5606D/78
|
Does not come out of standby | Corrupted memory data. on pin 6 of the 7702 memory, that is, ground pin 6 of the memory. see note. | ||
| PHILIPS |
32PFL5606D/78
|
Doesn't start. with only 3.3v present, the other voltages are deactivated. | Ver 1m20 e 1d38 | ||
| PHILIPS |
32PFL5606D/78
|
Sometimes it turns on and works for about 30 seconds, that's when it turns on. | Pci principal (bga?). | ||
| PHILIPS |
32PFL5605D
|
Doesn't start | Activate sdm mode and see if it will turn on normally. If so, check the options | ||
| PHILIPS |
32PFL4017G/78
|
It turned on but it was stuck on the HDMI, but tsound are cases wsound it gets stuck on the channel | Update the software | ||
| PHILIPS |
32PFL4017G
|
Turns on normally but nothing works and it hangs on channel 3 | Update via pendrive | ||
| PHILIPS |
29SX8674
|
Does not turn on, power supply pulsing | Damper diode 6904 by228 with leakage and transistor 7980 bd440 shorted causing the 5980 coil to burn | ||
| PHILIPS |
65PUS6121
|
Psu off | Check q9101 | Mihai | |
| PHILIPS |
55PFL6007H
|
No hdmi port works | See si19387 that controls the 4 hdmi | C. Santos | |
| PHILIPS |
55PUS6162
|
No voltages at the power supply. inoperative | See u9101(ssc3s121a) in power supply | C. Santos | |
| PHILIPS |
37PFL5522D
|
LED flashes but does not start | 5V voltage-free supply, IC NCP1207A | ||
| PHILIPS |
47PFL8404H
|
Hdmi inputs don't work | Check the ci that controls the hdmi ports tda9996hl | ||
| PHILIPS |
14PT3131
|
Top line and bar of about 5cm at the bottom | Voltage at the collector of the fr7465 drops to -11.3v | Capacitor c2446 with the replace, the voltage normalized to -12.8v | samuel leite |
| PHILIPS |
42PFL7762D/12
|
Does not turn on, standby LED is off | Check r409(8.2kω), transistor t402(3fw) and ci u400 (tea1533at) | Mário Martins | |
| PHILIPS |
42PFL3527H
|
The standby LED turns on, then goes off but does not start | Fotoacoplador ic9106(pc123) | EL817 can be used | Marco Marques |
| PHILIPS |
48PFH5500
|
Doesn't start | Verificar e substituir r9307(2,2ω/1/4w), r9309(10ω/1/8w), r9310(10kω/1/8w), r9311(750ω), u9301(ld5532), c9307(nc/47pf) | Martin | |
| PHILIPS |
43PUH6101
|
Doesn't start | Diode d9105(sk5100) open. | Cardozo |