Philips Repair Tips
Search: philips
Results: 14224
Results: 14224
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
32PFL3403 42PFL3403 42PFL5403
LC8.1L LA |
After a while, 5 to 10 minutes, it goes off and the LED flashes twice | Change in internal resistance in the speaker with an approximate resistance of 3.8ω | Replace the speaker or place a resistor in series. | |
PHILIPS |
49PUS6412
TPM17.3E LA |
No image, LEDs light up | T-con with lack of 15v vdd voltage | Check capacitors on the 15v line. c2305(10µf) | ERP-ASSIST |
PHILIPS |
24PFT4022
TPN17.1E |
Doesn't start. power supply inoperative. | Burned fountain | Substituir c9100 (100pf,) q9101 (stg6n65k3, ka65d) r9101 (0,33ω), r9111, r9112 (47ω) r9115 (470ω) ic9101 (pf6005a - 6 pin) | |
PHILIPS |
24PFT4022
TPN17.1E |
Doesn't start. power supply inoperative. | Burnt power supply switching transistor | Substituir c9100 (100µf 2kv) q9101 (stf6n65k3) r9111, r9112 (47ω) r9115 (470ω) ic9101 (pf6005a - 6 pin) | Pablo |
PHILIPS |
32PHG4900/78
|
Burning the LEDs reduces the current | Excess current in LEDs | Https://youtu.be/owehrvu9rfg | Eliel Batista |
PHILIPS |
32PFL3605D 40PFL3605D
LC10.1L |
TV turns on and then turns off. standby LED flashing 4x. | One of the speaker coils open. main board triggers protection. | 6Ω speaker replacement | rafaelmoraes99 |
PHILIPS |
48PFG5000
|
White screen with no image, backlight on | Ca62 shorted on right side buffer board | I removed | Adrian Chapadão do Céu Goiás |
PHILIPS |
55PUG6212
|
Doesn't even turn on the LED | Unknown | Shorted 911 diode | Robison |
PHILIPS |
32PFL4007D
|
Turns on, doesn't appear immediately or image | Memory error, flash memory defect | Remove the memory and re-record, or replace it with another recorded one | Gbrito |
PHILIPS |
32PFL4007D
|
Turns on, doesn't appear immediately or image | T-com short | Changing t-com lg components | Gbrito |
PHILIPS |
20PT3331
LO3.1 |
Vertical closed and vertical transistors shorted | This TV works with bd135 and bd136 at the output, as today you only find half-assed parts on the market | In place of the bd 135 I put tip 41 and in the bd 136 I put tip42 just pay attention to the pinouts that from tip to bd replace the base and emitter pinouts | Luan Victrolas |
PHILIPS |
42PFL3605
|
No image | Lamp board | Replacement | beto |
PHILIPS |
42PFL3604
|
Turns on a dark backlight on half of the screen, then cuts the lighting. | T904 changed, change. | electronicssupplyparts - Gramado/RS | |
PHILIPS |
32PFL3605
|
No image with sound | I replaced the 750k resistor but it didn't solve the problem so I put the 2j30 capacitor that I didn't have on the board and it worked fine | I replaced the 750k resistor but it didn't solve the problem so I put the 2j30 capacitor that I didn't have on the board and it worked fine | antonio nobrega patos pb |
PHILIPS |
43PFG5100
|
TV turns on the LEDs but no image | Capacitor c 218 v-com board | Made the replace | electros |
PHILIPS |
55PUG6513
T-CON 6870C-0769A |
No image | Short in the t-con capacitor line, c493, c494, c490, c491, c492, tsound is a short in c280 and c281 as well. | Remove one by one, one of them will be shorted. | WORLD TV - Sorocaba |
PHILIPS |
32PFL5332/78
|
Image failing to cause vibration on the TV, image disappears completely sometimes | Lvds cable with oxidation and extremely dark terminals (terminal that connects to the t-con | Clean with (caol) and cotton swabs and then finish with isopropyl alcohol | LED TECH / CDS_DIAS |
PHILIPS |
32PFL5332/78
|
Backlight sometimes doesn't light up | Swollen capacitors on the inverter board | Replace 2 680μF x 35v 105ºC capacitors, clean the connectors and check cold soldering on the power supply board. | LED TECH / CDS_DIAS |
PHILIPS |
20PT3331/78
|
Has sound no image just characters | It was not the 150k resistor (r3442) nor the 10nf/250v capacitor (2447) the cause was the flay-back | Eletrônica Bastos | |
PHILIPS |
14PT3131/78R
|
It does not enter the AV function and does not record data in the memory or in the menu or service mode and remains vertically closed at the bottom of the TV by about 5cm | I removed the SMD capacitors on the memory power line and the TV returned to normal | Felipe José |