Philips Repair Tips

Search: philips
Results: 14210

Make	Model	Symptom	Problem	Solution	By
PHILIPS	32PFL3605D	Does not turn on or light up normally	PCI board defect	I just replaced it and it was done!	ELETRONICA AUTO TREVO
PHILIPS	21PT5433	Noise in the sound on stereo channels	Configurar lista de option byte ▬ob1 = 0 (tuner alps), 128 (tuner philips) ▬ ob2 = 192 ▬ ob3 = 64 ▬ ob4 = 224 ▬ ob5 = 72 ▬ ob 6 = 0 ▬ ob7 = 80		eletronica ndn
PHILIPS	29PT5645	Doesn't work av	Configure the following items in service mode 29pt5645/78 - op1 = 0 (alps tuner), 128 (philips tuner) - op2 = 160 - op3 = 128 - op4 = 164 - op5 = 250 - op6 = 42 - op7 = 0		eletronicandn
PHILIPS	29PT5645		Configure the following items in service mode 29pt5645/78 - op1 = 0 (alps tuner), 128 (philips tuner) - op2 = 160 - op3 = 128 - op4 = 164 - op5 = 250 - op6 = 42 - op7 = 0		eletronicandn
PHILIPS	21PT326A/78	Blinking led	Replacement	Flyback	fco
PHILIPS	40PFL5615D/78	The television turned off by itself and wouldn't turn on again.	Diode d911 shorted. replaced with 1n4004 for testing.	I will replace it with the original later to avoid future problems.	Ferraz
PHILIPS	32PFL3404	Does not turn on sometimes there is only sound	Capacitor azul cf01		JARBAS A BRITO
PHILIPS	42PFL3604	There is no 24 volt voltage at the power supply	Na power supply r849 10Ω smd e diodo d5 comum smd	Na fonte r849 10Ω smd e diodo d5 comum smd	edgardsdo
PHILIPS	14GL1316 GR1-VA	Does not turn on with noise (the power supply oscillates but there are no secondary voltages).	T 7348=c547, r 3348=11k e zd 6346=zener de 91v.		FERNANDO S
PHILIPS	29GX1899	TV turns on, has sound, has filament, changes channels, everything is normal, but with an image with a blue tone with faint retraces, without characters	Replace eprom		play back
PHILIPS	29PT554A	Inoperative, LED off (note: cap remains charged c2508)	Diode d 6514 short		krul
TV PHILIPS	21PT9476C/78 SK41L	TV with images bending at the top defect in the vertical plate	R309 .068r 2 watt changed		cunha753
PHILIPS	20PT222		Cold welding no cap. 2442 (smd)		eletrônica BRITO
PHILIPS	HTS3375X/78	Display off and fan running	Shorted transistor and fets	Replace q905, q907, q918	ELETRO CENTER
PHILIPS	20PT3331 L03.1L	When turning on, 3 colored lines would appear at the top of the screen, then a white line in the center and it would turn off	One of the vertical drive transistors q7461 or q7452 replaced and resolved	Lift the base and emitter and measure high scale	Cláudio Jardim Paulista bx. Pe
PHILIPS	21PT5435	Turning off before the image appears and there are times when it takes a while to turn off but with drizzle on the image when the antenna is placed, the channel appears and in thousandths of a second it turns off	I changed the transistors 7540 (bc547b), 7495 (bc337-25), diode 6445, capacitor c2455 and photocoupler, there was no solution to the problem. Then I started to suspect that the problem was the seletronic which, when the antenna was placed, it turned off , then I disconnected the pin that receives the 33 volts, I turned on the TV and it didn't turn off, and by chance, I found a c2007 capacitor with rusty pins, I removed it and put another one in its place (10mf/50v), I turned on the TV, the image appeared and, defect remedied.	Capacitor c2007, the cause of the defect, it is next to the seletronic, in addition to being rusty, it had a short circuit, causing the TV to turn off, we just had to replace it and that was it, the TV was broken.	PATRICK
PHILIPS	203331 L03.1L	Open resistor, replace	R 3445 = 1r pino 8 fly back	Open resistor, replace	Benê eletrônica Aalfenas
PHILIPS	42PFL5403	TV works - image disappears, only the audio remains	T01	T701 - carbonized pin -el41 -clean and jam	EMERSON RIBEIRO
PHILIPS	20PT3336	Turns on the image with straight lines and then turns off.	Zener diode 6318 (8.2v) and resistor 3318 (220r) on the trc board.		Manoel (Noca)
PHILIPS	20PT220A	Blinks and doesn't turn on	C 2551 (47x160v)		HP ELETRONICA