Philips Repair Tips

Search: philips
Results: 14210

Make	Model	Symptom	Problem	Solution	By
PHILIPS	21PT5433 L03.1	Turns it on and before the image appears it turns off the LED and it won't turn on again, just unplug it. she returns and repeats the same procedure	Defective tube socket	Replace the same one for a new one	eletroclaudio aguas belas
PHILIPS	20LG1049 GR1-R03	Reduced image without synchronization	Crystal 3.58 plastic format	Crystal replace	GENIVALDO
PHILIPS	29PT9467	Turns on normally with sound, lights up filament, without screen voltage and without image	Leaky pipe socket		Bruske
PHILIPS	29PT552A L9-LLS	LED keeps oscillating, turns on, doesn't turn on	Vbat voltage too high	Changing the two capacitors, c2450 and c2551, 47/160v, the TV was awesome	ffeet
PHILIPS	29PT458A/78 *	Works normally after 2 hours and turns off loudly with 3 vertical lines, after it turns off the first time it goes away.	I replaced the socket with someone else's information, and it was fine.	Your replace	wagner
PHILIPS	20PT4331 L03.1L	Totally unfocused image showing 3 blurred colors (green, blue, red) implying that it's a socket	Q7463 bc546 short between collector and base	Replace the q7463 tv got a 10	JOSÉ GUSMÃO
PHILIPS	14PT316A/78R	Power supply does not work, oscillating	Chap. 2530 and 2540 at power supply	Replace both ok.	fabiusmax
PHILIPS	14GL1316/78R	No image, no OSD, normal tube, normal filament just doesn't show up in the image.	In 7207 TDA4661 Ruim.	Replace ci 7207 tda4661	PALAURO
PHILIPS	28PT800A FL1.17	Does not start. red display on. protection activated	See line transformer, diode 6536 (byw29f) and smds 7541, 7541, 7542		Divercentro
PHILIPS	20PT228A LO1.2L.	Tv turning off	R.3417 . open.		geraldo eletr.c.grande
PHILIPS	21PT6446/78	Vertical with closed top and three colored lines	Electrolytic capacitor 2464 and 2465 with low capacitance	Replace them	eletrônica BRITO
PHILIPS	21PT8467	Vertical fechado	3445 open 7463 shorted		This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	20PT3331	Totally inoperative	Saturate. Saida Horintal	After changing. horizontally, the TV turns off after 5 s. Then I just adjusted the screen and everything went back to normal	ROMILDO
PHILIPS	29PT554A	Dark screen with retrace lines (normal sound), actuating the screen only increases the retrace.	R3340 pci do cinescopio		py3ig
PHILIPS	21PT9647	Turns on normally but after three seconds returns to stand-by	18v zener diode shorted (zd 303)	Replace it	eletrônica BRITO
PHILIPS	21GL1369	Normal image but all red, blue, or green.	Swap the three RGB output transistors.	Ok	This email address is being protected from spambots. You need JavaScript enabled to view it.(floripasc)
PHILIPS	21PT5433	Works for approximately 10 seconds and turns off	Fleibk desk tripod malfunction		ildefonso
PHILIPS	25PT5536	Blue screen retrace line	Tube with shorted grid	Knock slowly on the neck of the tube/when it comes out, it doesn't come back	ladmyr
PHILIPS	20PT3331	Do not connect the power supply transformer making noise and the power supply does not arm	Horizontal output shorted bul312p I changed the function but it got hot until it burned, the fly back iron was broken, the ferrite was out of place	Replace the sound and place another iron to hold the ferrite	eletroclaudio aguas belas
PHILIPS	29PT4635 L01.1L	1 it didn't turn on, 2 it turned off as soon as the image appeared	1 tr smd pdtc143 posiçao p.c.i 7462 / 2 tr smd posiçao p.c.i 7450		Magayver