Philips Repair Tips
Search: philips
Results: 14231
Results: 14231
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
20GX 1659
|
Disarming | After checking everything - stand bi power supply I noticed that when it was turned off the vertical stretched, I replaced it but the defect continued | Solution I replaced the two electrolytic caps, it worked great - no more disarming hug | jose santos vicente |
| PHILIPS |
21PT8467/78
|
Dark screen, normal sound with characters and when entering the error code it shows error "10" | R3442 open | Replace the 100k 1/4w resistor with a 1/8w one | ELETROSONIC (GARANHUNS) |
| PHILIPS |
20PT 331
|
Does not turn on pulsating power supply | 7515 change the photo coupler and go to the hug | CARLOS AUGUSTO ELETROSILVA CANAVIEIRAS BAHIA | |
| PHILIPS |
14GL1013
|
Whistle at the power supply and it doesn't sound | Diode d6537 of 6.8v short and r3537 of 68k open | eletroclaudio aguas belas pe | |
| PHILIPS |
21PT6456
|
No image with osd | The tip for changing the r3442 100k was perfect for solving the defect! grateful. | Jhonny | |
| PHILIPS |
21PT6456
L03.1LAA |
Tv turning off | R.3318 on the tube plate | eletr.campo grande.jps | |
| PHILIPS |
14PT3336/78
|
Dark screen with osd | R3442 open | DANIEL SOLÂNEA PB | |
| TV PHILIPS |
14PT114A
|
Snoring in the sound and interference in the image | R 3003 open | Trqeio r3003 was ok | GESNER BISPO |
| PHILIPS |
29PT4643
|
Stripe on the upper side and black stripe on the lower horizontal | Capacitor 10m 100v ao lado do fry bak | mauro | |
| PHILIPS |
21PT5433
|
Stop | Q801,ic801,fr802,fr804,dz801,ic803,ic802, after changing these components the stand by was blinking with the power supply at 55vts, it was only resolved after changing the q808 | ELETRONICA ATUALIZADA | |
| PHILIPS |
20PT524
|
No power supply | D 5540 | ladmyr bh | |
| PHILIPS |
29PT4631
L01.1L AC |
Vertical closed | Open fusistor | Replace fusistor 3488 | beto2828 |
| PHILIPS |
21PT5436
|
Without image but with sound and menu characters | When turning on the TV, there was no image but with sound and channels tuned. the screen was completely dark, the menu characters acted and were visible on the screen but the channel image was missing | The 100k 3442 resistor was open, it works close to the flayback but precisely on pin 10 | |
| PHILIPS |
MINISISTEM FW 670P/41
|
When increasing the volume the sound goes to maximum with a simple touch of the potentiometer | Corrupted memory | I replaced the memory and solved the problem | ze nascimento |
| PHILIPS |
29PT554
|
Plug it into the socket and it stays on standby when you activate the control, the power supply turns on and off and the standby turns off and turns on again | Flyback | Replace o fly back | eletroclaudio aguas belas pe |
| PHILIPS |
29PT554
|
Plug it into the socket and it stays on standby when you activate the control, it arms and disarms and the standby turns off and comes on again and so on. | I replaced the flyback TV it worked normally | eletroclaudio aguas belas pe | |
| PHILIPS |
21GX1666
ANUBIS |
It doesn't open the vertical only halfway | Resistor | I replaced the 820k 3427 resistor and ran for a hug and the TV took a beating, but I managed it thanks to God | fernando timbauba PE |
| PHILIPS |
29PT48/78
|
Vertical closed | C308 | Replace c 308 | |
| PHILIPS |
29PT554
|
Turns on the LED turns on when activated the LED keeps turning on and off and the relay beats | Deflector coil | Replace the same | eletroclaudio aguas belas pe |
| PHILIPS |
14PT316
L9.2A |
Doesn't start. totally dead. power supply stopped, without voltage on the power supply regulator. | Resistor 3510 33k-3w | Tec vídeo |