Search: philips
Results: 14224
Make Model Symptom Problem Solution By
TV PHILIPS 21PT9467C/78
Without image and normal characters. D-302 aberto Replace wagner
PHILIPS 29PT9467/78
SK5.0A
Completely stopped Shorted power supply regulator. Replaced ci-w6556a-pos.601-supply regulator. Clayton
PHILIPS 29PT5645
Vertical retrace, folding image at the top of the screen. C2465 = 10/100v in the vertical stage Bruske
PHILIPS FW670P
When you increase the volume it goes to total (maximum) Replace eprom Schulz
PHILIPS 29PT4635/78
After turning on, image oscillates between RGB and off Trc / cinescopio Replace of the same eletronicaapolo
PHILIPS 14GL1010
GR1-AL
I'm a year old R 621 cut Replace Elias2305
PHILIPS 14GX1618/78R
ANUBIS VA
Jagged image Cap 6531 47/ 160 volts, one of the terminals was corroded, as it is glued, you can't see it, you can only remove it from the board. jorge mota
PHILIPS 21PT5435
L03.LAA
Alloy keeps buzzing in socket with spark of fire white screen flashing cmo frorecent It appears to be the socket or very high horn coming from the flayback. but the defect is the tube Replace the bubo This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS 21PT8467/78
Normal audio and characters, no luminance 100k resistor, position r3442, line abl Replace the same eletronicaapolo
PHILIPS 29PT4643
Vertical keeps shrinking at the bottom and sometimes turns off Chap. 2625 (smd 2.2uf x 6.3v) close to the Audio ci Ronie Grein
PHILIPS 14GL1015
Low power supply less than 40v Flyback shorted between pins 9 and 10 ELETRÔNICA GOMES
PHILIPS 14GL1015
When you tune in, it's black and white or changing the channel has interference Broken channel processor ELETRÔNICA GOMES
PHILIPS 14GLK1015
Dead, supply low less than 40 v, Short flyback, pins 9 and 10 ELETRÔNICA GOMES
PHILIPS 20GX1659
GR6-AL
The TV has sound but no image, when you open the screen, it gives you a dark, speckled screen (the stand-by LED flashes four times) Saida vertical tda8356 Replace tda8356 Eletronica Som & Imagem
PHILIPS 14PT
TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem. On the third and fourth pin of the seletronic there is each one a resistance (smd 101) that is 100Ω. heliomar
PHILIPS 20PT
TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem. On the third and fourth pin of the seletronic there is each one a resistance (smd 101) that is 100Ω. heliomar
PHILIPS 21PT5433
TV doesn't tune the channel or the pal. I even changed the selector but it didn't solve the problem. On the third and fourth pin of the seletronic there is each one a resistance (smd 101) that is 100Ω. heliomar
PHILIPS 21PT5433
Without image but with sound and menu characters When turning on this TV, it came with no image but with sound and tuning. The screen was completely dark, the menu characters acted and were visible on the screen but the channel image was missing. 100k resistor 3442 fully open, it works close to the flayback but precisely on pin 10 of it This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS 20MT2131
TV with vertical closed at the bottom and no sound Main cause is the 24c16wp eprom memory, there is no point in adding another 24c16 type, it has to be the same as the 24c16wp It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, those of 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS 20PT3336
TV with vertical closed at the bottom and no sound Main cause is the 24c16wp eprom memory, there is no point in adding another 24c16 type, it has to be the same as the 24c16wp It was replaced and the TV was broken, as a precaution, also replace the capacitors that are close to the flayback, the 470mfx16v or 10mfx160v, 47mfx50v, 47mfx16v This email address is being protected from spambots. You need JavaScript enabled to view it.