Philips Repair Tips

Search: philips
Results: 14231

Make	Model	Symptom	Problem	Solution	By
PHILIPS	20PT529A/78	Tv arms and disarms	T7408 =bd135 with open collector	Replace it with another and run to another	Antonio Carlos (Eletrônica Renascer)
PHILIPS	29PT6542 L04	Hit the relay once and it won't turn on	6573 diode connected to the photo coupler		brancobilli
PHILIPS	32PFL3008D V2.11	Duplicated or inverted screen	Type 062598 menu 003 and run for the hug		Mario Moreci
PHILIPS	42PFL3508G/78	Philips soon appears, sound remains, defective LED bars	Change panel LEDs		Luizsantos
PHILIPS	47PFL4007G/78	Takes time to exit standby	3v3 regulator changed on the main board code: u701- reference: g1084-33	Check its output, as in the test it is good	Ceará
PHILIPS	29PT4631/78R	Turns on and then turns off, the relay kept hitting (arming and disarming)	Transistors bc 7463 (bc327) and 7461 (bc 337) located near the power supply secondary capacitors	They were replaced and resolved, you can run for the hug!	ANTÔNIO ZWIRTES
PHILIPS	20PT120A/78R	When you plug it into the socket, the LED lights up when you click to turn it on, the LED blinks a few times but the TV doesn't turn on	The cause is the lack of 3.9 volt voltage coming out of the collector of the smd 7440 transistor or the smd 2442 capacitor	Changing the transistor and capacitor in my case	AssisTec
PHILIPS	32PFL3805D/78	Not even the standby LED lights up, completely dead. capacitor c502 (100pf/1kv) burst.	Replace u501 (ncp1207) and resistors r514(10r), r515(10k) and c502(100pf/1kv)		Luir
PHILIPS	40PFL6606D/78	All dead stop	Change without testing q510 q501 and d101 and d102		ELETRONICA PUBLISOM RGN
PHILIPS	40PFL3606D	No image/characters, lamps on	Resistor 750 k na tcon aberto, perto ic 7j00		oskarala
PHILIPS	32PFL3404	Red LED doesn't turn on	If you remove the connector from the power supply to the main PCI it works again	Replace c474 do 3v3	Center som
PHILIPS	32PFL3404	So led standby aceso	C474 perto do cristal x5		DIVINO
PHILIPS	14PT3331/78	Input fuse blowing	Change fuse and ptc		eletronica sto ant rj bahia
PHILIPS	21PT9467C/78	Vertical closed from the middle up	D351=ba158 fully open	Replace it with another and run to another	Antonio Carlos (Eletrônica Renascer)
PHILIPS	21PT8467/78	Vertical closed a line in the middle of the screen	In this case, the ak was the electrolytic cap, in position 2444 of 470/16v. It was only giving 400 microf. With the change, the vertical opened	Electrolytic cover, in position 2444 of 470/16v. It was only giving 400 microf. With the replace, the vertical opened
PHILIPS	21PT8467/78	Turns on, normal, but the sound appears little by little. taking time to get high. change the 2200/16 capacitor.. it may be good but it fails. The power supply comes from the chopper output and feeds the sound ci.	Turns on, normal, but the sound appears little by little. taking time to get high. change the 2200/16 capacitor.. it may be good but it fails. The power supply comes from the chopper output and feeds the sound ci.	Turns on, normal, but the sound appears little by little. taking time to get high. replace the 2200/16 capacitor.. it may be good but it fails. The power supply comes from the chopper output and feeds the sound ci.	Marcos-Confresa,MT
PHILIPS	55PUG6300	TV does not turn on, power supply without any voltage at the output.	Diodo d9104(smd) em curto - diodo de 100v x 5a		Persio (TVCompany)
PHILIPS	43PFG5000/78	The LEDs turn on but tsound is no image	C109 c120 on the display ruler		Adeilton
PHILIPS	42PFL3007D/78	Flashing the philips name and it doesn't turn on	Power supply	Replace without testing the capacitor c9353 (330/16) and it's solved	Celio Paulo de oliveira
PHILIPS	20PT3331/78	It didn't work with the remote control, it had 3v3 on the sensor	Change the sensor go and run to the hug	And	eletronica sto ant rj