Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
CTX
|
No colour + poor greyscale | Pin 1 tda3650 low ( normally 9v ) r3222 high 10r | ||
| PHILIPS |
CTX
|
Memory loss ( changed battery ) | M5840 mem ic | ||
| PHILIPS |
CTX
|
Low width and bowed right hand side | R3483 6.2Ω o.c drive to diode modulator | ||
| PHILIPS |
CTX
|
Losing memory. | Check for dry on or faulty 2.4v cell 1777. | ||
| PHILIPS |
CTX
|
Line tr sc replacement blows after 1 week | C2531 in chopper cct low | ||
| PHILIPS |
CTX
|
Line tearing at top - worse on vcr. | C2378 ( 1uf ) dried up. | ||
| PHILIPS |
CTX
|
Line instability on vcr playback | Adjust agc preset r3144 | ||
| PHILIPS |
CTX
|
Int no startup - stations will not store. | Battery. | ||
| PHILIPS |
CTX
|
Int dead | Dry joints loptx | ||
| PHILIPS |
CTX
|
Int colour | 0 | ||
| PHILIPS |
CTX
|
Frame collapse - intermittent. | Check connections around loptx | ||
| PHILIPS |
CTX
|
Frame - picture jitter. | Drys around loptx | ||
| PHILIPS |
CTX
|
Field scan noisy | Q541(2sd1266) ripple filter tr s/c. (used but11af in lieu) | ||
| PHILIPS |
CTX
|
Eht & crt heaters ok but no raster & loud hum from | R3585 ( 2r2 ) o/c | ||
| PHILIPS |
CTX
|
Dead. | Check r3394/3395 27k , 2.5w for o/c. | ||
| PHILIPS |
CTX
|
Dead with whistle - ok on dummy load | Dry joints c2609 | ||
| PHILIPS |
CTX
|
Dead set screams and blows line op transistor if l | C2351 chopper transistor base coupler 4u7 | ||
| PHILIPS |
CTX
|
Dead - overload on lip | Eht lead s/c | ||
| PHILIPS |
CTX
|
Dead - no 125v, faint whine from psu | D6317 1n4148 leaky | ||
| PHILIPS |
CTX
|
Dead - ht low at 50v | Trs 7322 & 7323 bc548 and bc558 faulty - (read ok) |