Philips Repair Tips

Search: philips
Results: 14210

Make	Model	Symptom	Problem
PHILIPS	ANUBIS B	Horizontal grey line on screen	C2413 10nf in field cct
PHILIPS	ANUBIS B	Er4 displayed on screen - no text only lines.	27mhz crystal 1701.
PHILIPS	ANUBIS A-AC 17PT166A	Dead - in shutdown mode	S/c across loptr coll & emitt - not loptx this time but c2450 330nf 250v scan coupling cap s/c
PHILIPS	ANUBIS A-AC	Ok until put into st/by when led flashes with thumping noise	D6568 llzf6v2 leaky in st/by cct
PHILIPS	ANUBIS A-AC	Flickers on high brightness with drop in ht	Tr7554 bc337a leaky
PHILIPS	ANUBIS A.AC	Blank raster - no sound ,osd ok	Stuck in av mode. pin 18 ic7015 read 3v istead of 0v as tr7877 never soldered
PHILIPS	ANUBIS A.AB	Tuning - not stopping when tuning or memorise	Ident pin on micro going leaky - req new micro
PHILIPS	ANUBIS A.AB	"e3" showing at bottom of screen	Cured by replacing eeprom with a blank
PHILIPS	ANUBIS A AC	Narrow pic 4" wide - rest blanked out	Tda3504 vid contr chip ic7280
PHILIPS	ANUBIS A AC	Dead	C2450 scan coupling cap s/c 330nf in 17/17" crts
PHILIPS	ANUBIS A AC	Blows but11a lop tr int	Dry joints scan coils conn plug
PHILIPS	ANUBIS A 52ZY3535	To exit demo mode	Press prog - & + together at sw on
PHILIPS	ANUBIS A 14PT155A/05	Dead - 95v being dragged down because the line dr tr turned hard on by 12v from pin 29 of ic7015 (tda4504b).	Loptx
PHILIPS	ANUBIS A	Dead but blows fuse after repair kit fitted	Crack in print between pin 12 of chopper tfmr & optocoupler
PHILIPS	ANUBIS A	When in stby led flashes and loudspeaker thumps	D6568 6v2 zener
PHILIPS	ANUBIS A	Sound no pic field collapse	Tda3653 field chip dry jointed but resoldering did not cure - replacement did
PHILIPS	ANUBIS A	Set works but if a bright sceen pic flickers & h.t	T7554 ( bc337 )
PHILIPS	ANUBIS A	No text , "e14" on display	Xtal 1701 on saa5246
PHILIPS	ANUBIS A	No sound, vision or leds - short squeak at switch on	Ht =100v - no line drive or 5v from psu lopt faulty
PHILIPS	ANUBIS A	No sound	In perm mute as tr7156 bc848 leaky