Search: philips
Results: 14238
Make Model Symptom Problem Solution By
PHILIPS 54VP51C
It doesn't work (it stays off). Verificar fusivel f401 e capacitor c423. * 18mar97 anc *. verificar fusivel f402 (5a) aberto. * 20ago97 anc *.
PHILIPS 54VP51C
"cross" [+] does not appear in service conv mode. Check integrated ic11 (24c08). * 18mar97 anc *.
PHILIPS 54VP51C
Does not adjust conv. green (i) "vert. green". Check transistor q156 for short. *27Aug97 anc*.
PHILIPS 54VP51C
Damages resistor R161 and r162, check possible short in q156. * 27Aug97 anc*.
PHILIPS 54VP51C
Damage fuse F401, check capacitor c423. * 18mar97 anc *. f3 (conv), check possible short in ic11 (eeprom). * 18mar97 anc *.
PHILIPS 54VP51C
Running bars on av Enter service mode and correct the registry 17 should be 06. * 03mar97 anc *.
PHILIPS 54VP51C
Colored outlines in the image (rgb). Check open f3. * 18mar97 anc *. check micro ic10 (p83c654) without sda. * 16Sep97 anc * check positioning of the "fresnel" lens. 14nov97 anc *.
PHILIPS 54VP51C
Commands do not work (all). Possibility of an image appearing via VCR, but with an image deformed, see fuse f408. * 15Oct97 anc *.
PHILIPS 54VP51C
Poor brightness (little shine). Isolate transcorder unit and evaluate possible defect in unit. * 15Oct97 anc *.
PHILIPS 54VP51C
Heating transistor Convergence panel outputs, check fuse f3 (1a) open. * 18mar97 anc *.
PHILIPS 54VP51C
Heating resistor R161 and r162, check for possible leakage in transistor q156. * 27Aug97 anc *.
PHILIPS 54VP51C
Appears in the / menu, however, without an image. Check transcorder with possible cold welds, or defective. *20Aug97 anc*.
PHILIPS 54PP700A
Without tune. Check connection cable a402 pin 1 (+130v). * 16Oct97 anc*.
PHILIPS 54PP700A
Frame sparkling with expanding "bloom". Verificar integrado ic402 (cold side). * 13out98 alan *.
PHILIPS 53UP72G
Vertical closing intermittent. Check welding of ic552 and ic550. * 29Aug96 anc *.
PHILIPS 53UP72G
Voltages below the specified (vo, +b,..) +15 e 15, verificar ic110 (n5532). * 25set97 anc *.
PHILIPS 53UP72G
Voltage oscillating (pulsating). Power supply (+5v stb), possible short on the +5 line, see d305 and d306 with escape. * 16Aug96 anc *. check integrated ic401 (6126642). * 25Sep97 anc *.
PHILIPS 53UP72G
Green fabric R698 aberto. *17set98 h.desk*
PHILIPS 53UP72G
Dark "black" screen (see also bril4). Check capacitor c618 (.01) with leakage, pin 58 ic600. * 15Aug96 anc *. driven by the vertical, see r585 (20k). * 09Oct96 anc *. resistor r301 (0.27Û) open. * 05nov96 anc *. check integrated IC600 (TA8845AN). *27Aug97 anc*. case fi
PHILIPS 53UP72G
Blue fabric Resistor r301 (0.27Û) open, occurs when switching on and then screen goes dark. * 05nov96 anc *. blue screen with dos and sound, check ic304 (ssp board). *17Sep98 h.desk*