Philips Repair Tips
Search: philips
Results: 14231
Results: 14231
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
29PT4635/78
|
No image | C2445 c47/Akhaf | Replace of the same | fco |
PHILIPS |
FW M35
|
Display does not light up | Sawtooth pwdn pulse is in sinusoid | D723 under tails. rusty trocheu | VITALTEC |
PHILIPS |
29PT9467
|
Inoperative everything off | C453,c621,c628,c632. | Replace them | eletroclaudio |
PHILIPS |
32PFL5604/78
S TCM3.2L LA |
The TV turns on with audio, but without backlight | C21 leak in the pfc circuit causing malfunction | leitemarcellus | |
PHILIPS |
20PT324A
|
LED lights up and flashing | Cap 47uf 160 v defective | Replaced and the TV worked perfectly | José nogueira |
PHILIPS |
20PT534A
|
LED blinks weakly without flickering | C-2540 and c 2530 from the power supply | Replace and go out for a hug. | ELTON CASTRO |
PHILIPS |
21PT-8467
|
Vertical closed and noisy | Resistor (r-3445) open 1r is close to the fly back | Ademar / Videira s.c | |
PHILIPS |
20PT324A/78
|
Vertical closed at the top and bottom | R3466 amended | Replace | Pedro |
PHILIPS |
20PT-3336
|
No vertical deflection | Vertical closed | Replace (r-3448) 1r resistor | Ademar / Videira s.c |
PHILIPS |
32PFL3404
|
Does not turn on or turns on without image | Cf1 | The correct value of cf1 is 220 pf | videoeaudio |
PHILIPS |
29PT4631
- |
Does not have high voltage. normal power supply voltages, normal horizontal oscillator waveform; cut off and start. | 7461(bc337-25) with high resistance between base and emitter. | Ademir tc | |
PHILIPS |
21PT9467C
SK4.1L |
No red | D504 ba158 with small leak (on the tube plate) | Check out of place on high homs scale, replace. | jasvan souza |
PHILIPS |
14GL1015
|
LED lights up but does not oscillate horizontally power supply +b normal | Cold solder em t 7502 | Macsom | |
PHILIPS |
20GL1049/78
|
Lack of height (+- 3cm top and bottom) | R 3426 (amended) | krul | |
PHILIPS |
20PT220
|
Sem osd | Replace q-7682 | Ademar / Videira sc | |
PHILIPS |
20PT3331
|
Turns off after approximately 5 minutes | Swap (q-7643) bc-546 can be used bc-547 | Ademar / Videira sc | |
PHILIPS |
20PT3336
|
With characters but without image and brightness. | Change the resistors (r-3442 and r-3459) values of 100k each | Ademar / Videira sc | |
PHILIPS |
3331 LINHA PT
|
Reduced frame | +b only with 68 volts on the secondary, replace the r-3526 connected to the power supply fet (0.15 r replace and do not measure) | Ademar / Videira sc | |
PHILIPS |
1340
|
Green screen with lines | Replace diode zd-359 value of 3.9 volts | Ademar / Videira sc | |
PHILIPS |
TODOS LINHA PT
L-04 |
Shutting down with error 11 | Change coupler photo | Ademar / Videira sc |