Search: sony
Results: 20073
Make Model Symptom Problem Solution By
SONY AE1
Line op transistor keeps blowing L806 sc
SONY AE1
Lack of height with cramping in centre The 27v supply to fop chip low at 20v, check r802 0r47 & d801 leaky rgp15j
SONY AE1
Lack of height field foldover cramping in centre R801 ( 0.47r )
SONY AE1
Jagged pic - may be int Rv502 10k hor phase pot dirty
SONY AE1
Intermittent teletext contrast variations Dry joint at the emitter of q02 on board v
SONY AE1
Intermittent loss of the luminance signal Delay line ( dl332 ) on pcb b. its part no. is 1-236-062-11.
SONY AE1
Int/slow start up C615 1000µ 25v in 14v supply leaky
SONY AE1
Int won't come out of st/by Ht checked - ok at 135v when on but high at 143v in st/by - set st/by set ht control for 135v
SONY AE1
Int picture , touching / adjusting a1 brings picture Check for drys on text pcb , particularly on top mounted plugs / sockets
SONY AE1
Int loss sound pic ok D/j on ic251 or ic252
SONY AE1
Int loss sound and picture Q608 12v reg dry resolder chopper tx and metal plates earth tabs
SONY AE1
Frame - striations. R5025 ( 680Ω )
SONY AE1
Flashing/smearing & then off when heated Ic301 tda4580 rgb controller faulty & overheating
SONY AE1
Fizzing tripping noise. Drys on windings pins 17&18 of t601.
SONY AE1
Field reduced with cramping/foldover R802 0r47
SONY AE1
Field non lin and short pic C531 680µ 25v
SONY AE1
Field lin bottom cramp C531 680µ 25v
SONY AE1
Field lin - top stretched C531 680µ
SONY AE1
Field collapse Tda8170, tea2031a, l806
SONY AE1
Field collapse Check ic502, r802, r530 & r802