Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
CCDTR600
|
After lancing, e-e all blue (had to set add 2b data to 58) | Unit was lanc'd and picture became blue in e-e. | ||
| SONY |
CCDTR600
|
No rec pix (found poor solder on cn205 pin 3 on vs125 board) | Camera had good e-e pix and playback but no record. | ||
| SONY |
CCDTR600
|
Broken strap holder on right cabinet | Customer claims that the strap holder broke and camera wasdropped. | ||
| SONY |
CCDTR400
|
Drum spins fast (found x502 bad) | Drum spins fast. | ||
| SONY |
CCDTR36
|
After lancing, e-e all blue (had to set add 2b data to 58) | Unit was lanc'd and picture became blue in e-e. | ||
| SONY |
CCDTR33
|
No a/v output (found cn201 not soldered to vs124 board) | 2 cases this week of cn201 lifted from board for no reason. | ||
| SONY |
CCDTR200E
|
No color vtr play only (found open trace ic201/25-ic301/46) | No color in playback mode. | ||
| SONY |
CCDTR100
|
After lancing, e-e all blue (had to set add 2b data to 58) | Unit was lanc'd and picture became blue in e-e. | ||
| SONY |
CCDTR100
|
No rec pix (found poor solder on cn205 pin 3 on vs125 board) | Camera had good e-e pix and playback but no record. | ||
| SONY |
CCDFX710
|
Edit search video distortion (capstan mount screw was loose) | Customer complaint of int. distorted video on edit search.also mechanism noisy. had excessive intermittent tracking lines. editsearch virtually unuseable. -solution found mounting screw for capstan motor loose causing capstanto change position in edit | ||
| SONY |
CCDFX630
|
Dist. aud. (setting page d, add. 8e data to "ae" fixed unit) | Raspy audio on playback. | ||
| SONY |
CCDFX620
|
Premature tape end signal (found end sensors on ls33 bad) | Tape end signal comes on prematurely. resoldered sl-31 boardconnectors and connector to sl-31 board on ls-33 board and oiled lsconnector with fl oil and problem was still present. | ||
| SONY |
CCDFX435
|
Dist. aud. (setting page d, add. 8e data to "ae" fixed unit) | Raspy audio on playback. | ||
| SONY |
CCDFX430
|
Dist. aud. (setting page d, add. 8e data to "ae" fixed unit) | Raspy audio on playback. | ||
| SONY |
CCDFX330
|
Won't pb own recording (found c227 & c235 on va88 mcb bad) | Unit would pb previously recorded material but would not pbits own recorded material. anything recorded on this unit would pb onanother unit. also noticed burst in camera e-e was deformed. | ||
| SONY |
CCDFX230
|
Won't pb own recording (found c227 & c235 on va88 mcb bad) | Unit would pb previously recorded material but would not pbits own recorded material. anything recorded on this unit would pb onanother unit. also noticed burst in camera e-e was deformed. | ||
| SONY |
CCDFX228
|
Won't pb own recording (found c227 & c235 on va88 mcb bad) | Unit would pb previously recorded material but would not pbits own recorded material. anything recorded on this unit would pb onanother unit. also noticed burst in camera e-e was deformed. | ||
| SONY |
PIC1000
|
Ac adapter indicator with batteries | Unit indicated ac adapter when using batteries. found 2.8vdc on ic802 pin 3. | ||
| SONY |
GDM20SE1
|
Shutdown caused by scan fail | Power save and power indicators flash with center indicatoron. found ic404 caused the problem. | ||
| SONY |
CPD20SF2
|
No power switch function | Power switch knob would not mechanically touch the mainboard power switch. |