☰

Sony Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: sony
Results: 20073
Make Model Symptom Problem Solution By
SONY D235CK
No display - replace ic801, p/n 8-759-333-69 Unit would work but had no display.
SONY D143
#s switched for m901/902 in manual Reference numbers on page 31 of service manual for motorsswitched. m901/902 in break out are switched.
SONY D143
Static noise heard in audio out - replace ic601 (875929718) Static or noise heard in audio out.
SONY D141
Unit powers up then shuts down within 2 seconds Unit would power up but shuts down within 2 seconds.
SONY D141
No display - replace ic801 (8-759-326-68) No display. unit functions ok. ic801 syscon, putting outabnormal/distorted pulses. all b+ and must haves read ok.
SONY D141
#s switched for m901/902 in manual Reference numbers on page 31 of service manual for motorsswitched. m901/902 in break out are switched.
SONY D141
Static noise heard in audio out - replace ic601 (875929718) Static or noise heard in audio out.
SONY CFD8
No power cd The unit has no power cd that is caused by a little crack on the main board.
SONY CFD8
Grinding noise - replace optical block When no cd in unit, sled motor won't move. when cd in unitsled motor is turning continuously.
SONY CFD8
Sb aud 0328 Replaced ic801 per s/b, now cd shuts down after 9 hours ofcontinuous use. optic and cables ok. -hq comments: the s/b was due to a different symptom as you know. thisunit could have an intermittent problem.
SONY CFD8
16p harness cnp701 There is no part no. for the 16p harness that connects theop block, kss213, to main board. diagram can be found in supplement 1 ofthe cfd8 sm. -hq comments: the part number can be found in the cfd9 service manual,ref 51. it is 1-769-789-11.
SONY CFD758
Ic704 different Unit has different ic704 then s/m. unit uses ska9258dinstead of ba6296fp. is it compatible? original symptom was no sledmotor operation. when ba6296fp installed, the spindle motor would run athigh speed. reinstalled original and original symptom
SONY CFD750
Popping noise in audio after power up Any mode, audio would pop every few seconds
SONY CFD616
Error code 90 When ac first plugged in there is no initialization of unit,no power on, and no back light. display does show the words error 90.any ideas what this error code is? -hq comments: this question was faxed to tokyo. as soon as tokyoanswers, we will info
SONY CFD616
Mechanical jammmed and misaligned Mechanical jammed and misaligned.
SONY CFD610
Disc would not spincd palyer sled Discs would not spin and unit would read discs take out, ordiscs would spin and make a thumping or rubbing sound and unit would skipbadly.
SONY CFD606
Cd mechanism jammed Cd mechanism jammed. very common problem with this modeland similar models, cfd616/626. a disk was found in main tray assy ref217, without a disc holder .
SONY CFD600
Unit displays no disc - check solder short on c819 Unit displays no disc when disc inserted. mechanism wil notgo anywhere.
SONY CFD600
Mechanical noise when tape is in unit and playing. Unit produces rubbing or squeak noise when playing a tape.
SONY CFD600
Disc jamming Disc may become trapped in the disc case after improperloading.