Sony Repair Tips
Search: sony
Results: 20100
Results: 20100
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
CDXU6260
|
Extension cable for repairing display mcb (j-2502-009-7) | It may be difficult to repair the display mcb without using anextension cable. | ||
| SONY |
CDXU6260
|
Part # addition: faceplate front bezel, including buttons | The service manual shows the front bezel of the removablefaceplate as not supplied. the bezel also includes several of thebuttons (1 through 6, file, and dspl. | ||
| SONY |
CDXU606
|
Popping noise (resoldered mute output pin 57 of ic31) | Popping noise heard through speakers when changing disc ortracks. | ||
| SONY |
CDXU303
|
Missing part (ref. 168, tension spring) | Back tension spring missing from service arm assy.originally, i thought this was an isolated problem, but this is the thirdunit i've seen with this problem. | ||
| SONY |
CDXU300RF
|
Disc jams (replaced broken gear, ref. 112, p/n 3-364-432-01) | When disc is returned to magazine from play position, sliderassy #115 is not driven and disc doesn't return fully. | ||
| SONY |
CDXU300
|
Disc jams (replaced broken gear, ref. 112, p/n 3-364-432-01) | When disc is returned to magazine from play position, sliderassy #115 is not driven and disc doesn't return fully. | ||
| SONY |
CDXA55RF
|
Won't read discs (found flex poorly soldered to sled motor) | Flex cable coming from optic was not properly soldered fromfactory causing intermittent failure of optic to return to its inner mostpostion (home). this caused the symptom described as unit will loaddisc, but no spin, no play, no focus, intermittent. | ||
| SONY |
CDXA30
|
Popping noise between discs (replaced q303 on jack board) | As unit changed discs, a popping noise ocurred at the outputs.i checked all muting lines and they seemed to be working normally, until ichecked the muting relay, which was not energizing. | ||
| SONY |
CDX900
|
Part # correction: ref. 119 damper (part # is 3-384-914-01) | The part # for the damper is wrong in the manual. | ||
| SONY |
CDX6020
|
Unit would not eject disc (replaced ref. 902 and 903) | Unit would not eject. | ||
| SONY |
CDX600DSP
|
Extension cable for repairing display mcb (j-2502-009-8) | It may be difficult to repair the display mcb without using anextension cable. | ||
| SONY |
CDX5470
|
Extension cable for repairing display mcb (j-2502-009-8) | It may be difficult to repair the display mcb without using anextension cable. | ||
| SONY |
CDX5460
|
Extension cable for repairing display mcb (j-2502-009-7) | It may be difficult to repair the display mcb without using anextension cable. | ||
| SONY |
CDX5270
|
Extension cable for repairing display mcb (j-2502-009-8) | It may be difficult to repair the display mcb without using anextension cable. | ||
| SONY |
CDX5260
|
Extension cable for repairing display mcb (j-2502-009-7) | It may be difficult to repair the display mcb without using anextension cable. | ||
| SONY |
CDX5070
|
Extension cable for repairing display mcb (j-2502-009-8) | It may be difficult to repair the display mcb without using anextension cable. | ||
| SONY |
CDX5060
|
Extension cable for repairing display mcb (j-2502-009-7) | It may be difficult to repair the display mcb without using anextension cable. | ||
| SONY |
CDX5060
|
No audio (found ic503 and d515 defective) | Unit had no audio, any mode. seek tuning never stopped,manual tuning always showed stereo in fm. | ||
| SONY |
CCDVX3
|
Random streaks, looks like drop-outs/change ic605 | Unusual symptoms of a streak across the bottom of the screen,which resembled the switching interval but wasn't, along with randomstreaks that looked like dropouts in the upper quadrant of the monitorpicture but weren't. all caused by the aperture ic, ic6 | ||
| SONY |
CCDV88
|
No pix in normal play, but cue/review and pause ok | Had no sync, thus no pix in play. however, the unit woulddisplay a picture in cue/review and pause. |