Sony Repair Tips
Search: sony
Results: 20077
Results: 20077
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
WMSXF30
|
No tuning indicator - tuner cable and pointer out of slot | No tuning indicator, put back in place then lock tight cablecasing in place. | ||
| SONY |
WMSXF30
|
Motor pulley installed upside down | The replacement motor part x33367441 has the pulley installedupside down causing slippage of belt from motor. | ||
| SONY |
WMSXF10
|
Volume knob does not fit | Volume knob does not fit into gear (b) 337527901. both theknob and the gear were ordered. i referred to sb390 but the knobs andgear (part #'s) are different. -hq comments: this matter will be resolved when kcp gets parts in stock. | ||
| SONY |
WMSXF10
|
Play lever not listed (390568601) | Part number for play lever is not listed in kc parts master | ||
| SONY |
WMSFX44
|
No right channel on playback - replace c105, p/n 116263811 | When playing back a tape there was no right channel audio.checked cn301 and resoldered, but still no right audio. checked ic101/pin29 and had input and i had output at ic101 pin 23. followed trace toc105. had signal on one side but not on the other. | ||
| SONY |
WMFX56
|
Mech lockup | Unit would work for 1 or 2 auto reverses then lockup. | ||
| SONY |
WMFX56
|
No review | Unit does not go into review mode while playing in forwarddirection. | ||
| SONY |
WMFX56
|
Intermittent for reception - resolder cf3 | When twisting the tuner pcb for reception would cut in and out. pushing on certain areas of the pcb and soldering possible loose components, i found cf3 loose. | ||
| SONY |
WMFX55
|
Audio board part # change in computer | Part# for audio board is a3016220a in manual pg. 16. when putin computer part# changes to a3016221a but board is completely different.can forward board if needed. | ||
| SONY |
WMFX52
|
Drag or no movement when auto reverse | When tape is reversed extreme drag or no movement. chassisassy part # x33667601 was replaced. it improved problem but did not completely solve problem with drag and stopping when reversing. | ||
| SONY |
WMFX52
|
Mech lockup | Unit would work for 1 or 2 auto reverses then lockup. | ||
| SONY |
WMFX52
|
Doesn't play, will ff or rew but not both | Asd has sent several units to sj rrc that end up exchanged.unit will not play, will ff or rew but not both. tech finds gear teeth onref #124 and #112 don't mesh, with #114 ending up above #112. replacementof these parts doesn't help. -hq comments: pl | ||
| SONY |
WMFX43
|
Lost of w & f - hot glue chassis to case | Problem was that mech was coming up from case. | ||
| SONY |
WMFX303
|
Tape moves but no sound - realign flex cable. | Head flex calbe was misaligned. | ||
| SONY |
WMFX29
|
Intermittent fm reception - resolder ic502 | When pushing on display pcb fm, reception would cut in and out. after looking at the pcb, i found that pin #5 of ic502 was loose. | ||
| SONY |
WMFX20
|
Will not play tapes - replace belts | Found belts slipping. | ||
| SONY |
WMD6C
|
No audio - replace cp304, p/n 1-464-183-21 | Unit had no audio (rec or pb). this is new style board afters/n 267,201. | ||
| SONY |
WMD6C
|
Dead, no power - replace q601, p/n 8-729-116-57 | Unit totally dead, lost 6v supply going through dc-dc. ifound q601 open. | ||
| SONY |
WMAF79
|
Won't play intermittently - replace play lever | Play button must be depressed several times before audio isheard and the button stays in. | ||
| SONY |
WMAF59
|
No play lever lock - replace battery lid | Piece from batt door stuck in play lever path. |