Search: sony
Results: 20077
Make Model Symptom Problem Solution By
SONY EXR25
No power (had open trace near cnp6 and also near d415) The unit had no power. found open traces near cnp6 and jumperwires between d415.
SONY EXR25
No audio from speakers (found ic601 was defective) The unit had no speaker audio. found that ic601 was bad.
SONY EXR14
No display/no tuning (tape works ok) Unit had no display, and only static on radio. the tape deckworked fine. found d362 shorted, which also caused the trace between d362and pin 2 of cnp801 to open.
SONY EXCD40
Skipping when outer tracks are played The customer may complain that skipping occurs when outertracks of discs are played. this may occur if the mechanism sub-chassisis bent, which makes it more difficult to maintain proper focus at theouter portions of discs.
SONY ESR11
Part # correction: ic601 (s/m supp. #1); order 8-759-804-75 Ic 601 listed in the service manual is for xr210/6100. the# listed in the esr11 supplemnt # 1 is 8-759-801-11, which is a lb1261.the ic in the unit an la4445.
SONY CDXU8000
Skipping when outer tracks are played The customer may complain that skipping occurs when outertracks of discs are played. this may occur if the mechanism sub-chassisis bent, which makes it more difficult to maintain proper focus at theouter portions of discs.
SONY CDXU70
Cd custom file feature incompatability xr-u880/cdx-u70 Customer submitted unit with complaint will not go into cdfile function but custom file works with radio. tested unit andconfirmed problem. subbed an xr-u770 with cust. cdx-u70 and found no cdfile functions again. subbed a cdx-u300 into system and o
SONY CDXU303RF
No audio output (found broken traces near line-out jacks) Found that unit had no audio output from either left or rightrca jacks.
SONY CDXU303
Springs #156 installed upside down Found two springs #156 that provide tension for arms #172/173were installed upside down. saw the same thing on a cdxu303. thoughtperhaps asd who installed service kit x33660541 had also disassembled thisarea and put springs back wrong. this unit had
SONY CDXR79
Skipping when outer tracks are played The customer may complain that skipping occurs when outertracks of discs are played. this may occur if the mechanism sub-chassisis bent, which makes it more difficult to maintain proper focus at theouter portions of discs.
SONY CDXR77
Skipping when outer tracks are played The customer may complain that skipping occurs when outertracks of discs are played. this may occur if the mechanism sub-chassisis bent, which makes it more difficult to maintain proper focus at theouter portions of discs.
SONY CDXA55
Will not play disc The disc is not clamped tightly against turntable causing thedisc to skip when trying to read toc. the center of turntable is comingloose, preventing propper disc clamping.
SONY CDX900
Eliminating alternator noise Alternator noise is heard from the speakers, particularly ineuropean-made vehicles using floating ground systems.
SONY CDX900
No display or backlighting The unit does not have any display and/or backlighting.
SONY CDX7580
Skipping when outer tracks are played The customer may complain that skipping occurs when outertracks of discs are played. this may occur if the mechanism sub-chassisis bent, which makes it more difficult to maintain proper focus at theouter portions of discs.
SONY CDX7560
Skipping when outer tracks are played The customer may complain that skipping occurs when outertracks of discs are played. this may occur if the mechanism sub-chassisis bent, which makes it more difficult to maintain proper focus at theouter portions of discs.
SONY CDX7540
Skipping when outer tracks are played The customer may complain that skipping occurs when outertracks of discs are played. this may occur if the mechanism sub-chassisis bent, which makes it more difficult to maintain proper focus at theouter portions of discs.
SONY CDX7520
Skipping when outer tracks are played The customer may complain that skipping occurs when outertracks of discs are played. this may occur if the mechanism sub-chassisis bent, which makes it more difficult to maintain proper focus at theouter portions of discs.
SONY CDX65RF
Controller's display shows "full" when entering titles The changer controller's display may show full when tryingto enter disc titles, even though the customer has not yet entered themaximum of 110 disc titles. this problem occurs because some units didnot have the factory-entered titles erased before they
SONY CDX65
Controller's display shows "full" when entering titles The changer controller's display may show full when tryingto enter disc titles, even though the customer has not yet entered themaximum of 110 disc titles. this problem occurs because some units didnot have the factory-entered titles erased before they