Sony Repair Tips
Search: sony
Results: 20100
Results: 20100
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
XM4520
|
No audio output (resolder q963 and q964) | Unit would power up but had no audio output. found q963 andq964 were cold soldered. it appeared that when components were installedat the factory, the board and sub heat sink were not flush together,causing the solder connections to break loose. | ||
| SONY |
XA18
|
Pop noise heard when changing discs | A pop noise may be heard from the speakers when changingdiscs. | ||
| SONY |
CDXU6260
|
Will not accept cd, "load" flashes (re-align st lever) | When disc is loaded, unit will not chuck disc and load continues to flash. disc is ejected a few seconds later. found st lever pinned between chassis (r) assy and slide lever in top chassis assy. | ||
| SONY |
CDXU6260
|
No cd mech power (replace d523, p/n 8-719-026-90) | Cd mechanism will not reset or accept cd. found d523 shorted. | ||
| SONY |
CDXU6260
|
No display or illlumination (replace d501, pn 8-719-992-18) | The unit has no display or led illumination. found d501 to have 5.23v instead of 11.8v. | ||
| SONY |
CDXU6260
|
Display fades in and out when unit is tilted | Lcd segments fade in and out when the unit is tilted. | ||
| SONY |
CDXU606
|
One disc is not ejected | One disc may remain in the mechanism when the magazine isejected. | ||
| SONY |
CDXU404
|
One disc is not ejected | One disc may remain in the mechanism when the magazine isejected. | ||
| SONY |
CDXU303RF
|
One disc is not ejected | One disc may remain in the mechanism when the magazine isejected. | ||
| SONY |
CDXU303
|
One disc is not ejected | One disc may remain in the mechanism when the magazine isejected. | ||
| SONY |
CDXU300
|
Unit will not load cd's in vertical position | While in horizontal position, unit would load and playnormally, but when moved to vertical position, it would not load cd's. | ||
| SONY |
CDXU300
|
One cd left in the changer when magazine is ejected | Unit came back, after it was modifed, with one cd stuck insidethe changer after the magazine was ejected. -hq comments: tokyo has informed us that this problem may be caused byany of the following reasons: the magazine vibrates in the magazinecompartmen | ||
| SONY |
CDX5460
|
Will not accept cd, "load" flashes (re-align st lever) | When disc is loaded, unit will not chuck disc and load continues to flash. disc is ejected a few seconds later. found st lever pinned between chassis (r) assy and slide lever in top chassis assy. | ||
| SONY |
CDX5270
|
Extension cables available (order p/n j-2502-011-1) | Do we intend to provide a cable to connect the board and themech. for service purposes? -hq comments: the cables are available under p/n j-2502-011-1. see carstereo bulletin # 325 for details. | ||
| SONY |
CDX5260
|
Will not accept cd, "load" flashes (re-align st lever) | When disc is loaded, unit will not chuck disc and load continues to flash. disc is ejected a few seconds later. found st lever pinned between chassis (r) assy and slide lever in top chassis assy. | ||
| SONY |
CDX5070
|
Intermittent no power | The unit would intermittently lose all power. the problemcould sometimes be duplicated by flexing the unit. examined the mainboard with a magnifying lens to look for any cracks or other intermittentopens or shorts, but found none. live troubleshooting | ||
| SONY |
CDX5070
|
Display shows "e-04" | The unit would show e-04 on display. this problem is fairlyintermittent. | ||
| SONY |
CDX5070
|
Extension cable for cdx5070 | New model cdx5070 has a bayonnet type connector, (ref.#cnp504/cnj4), rather than a ribbon type. this connector mates the mdchas. to the main board. with this connection, the cd transport cannot berun free of the main board. this will make troubleshoot | ||
| SONY |
CDX5070
|
No operation (replace ic503, p/n 8-759-182-76) | The unit had no functions at all. noticed that the antennaremote lead was always at +6v, even with the unit switched off. suspectthat ic503 was shorted internally. | ||
| SONY |
CDX5060
|
Will not accept cd, "load" flashes (re-align st lever) | When disc is loaded, unit will not chuck disc and load continues to flash. disc is ejected a few seconds later. found st lever pinned between chassis (r) assy and slide lever in top chassis assy. |