Sony Repair Tips
Search: sony
Results: 20077
Results: 20077
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
MDPK1
|
Auto pause light always on | Auto pause light always on. pin 5 of cn-815 on the pk-17 boardopen. | ||
| SONY |
CCDF55
|
Date and time lost after battery is removed | When main battery was removed, date and time would be lost.customer tried several li batteries. | ||
| SONY |
WMAF59
|
No fm reception - change l2, p/n 1-459-847-11. | After trying unit, am and cassette worked fine, but there wasno fm reception. measuring voltage levels on ic1, all of the voltagesseemed close enough. then, after measuring continuity on fm related coils,i found that l2 was open. | ||
| SONY |
KPR41EXR95
|
Green crt leaking, replaced the green crt | Green crt leaked and shorted out the crt socket. | ||
| SONY |
D33
|
Disc spins for a few seconds then shuts down. resolder r531 | Disc spins for a few seconds then shuts down. it does not readtoc. | ||
| SONY |
KV27V55
|
Dead, replaced c607, q601, q602, and r607 | Unit will not turn on (no power). found c607 blown, q602 andq601 shorted and r607 open. | ||
| SONY |
CDX5060
|
No audio (replace defective d515, p/n 8-719-921-98) | Unit had no audio out, caused by defective d515 which isconnected between the amp b+ line of ic503 (pin 6) and ground. | ||
| SONY |
KV32TS36
|
No closed caption, replaced ic-150 | No closed caption. (part to be given to mzd). | ||
| SONY |
KV32XBR36
|
Intermittly picture pulls in from the sides, replaced c528 | Picture closing in on the sides intermittly. | ||
| SONY |
KV27TS36
|
White vertical line on each side of picture, replace ic301 | Customer heard snap sound, then the picture shifted 1 1/2 upvertically with severe keystone shape. left side of pix had 1/4 blackvertical line in about 2. right side of pix had 1/4 white vertical linein about 2. service mode adjustments corrected and | ||
| SONY |
HSTH1750
|
Replacement part for ic702 is not compatible 8-759-093-87 | Replacement part received from kcp has a different type. thepart received from kcp when 8-759-093-87 is ordered is tmp47c870n-v468.this component causes the display to blank when installed in this unit. -hq comments: 11/24/93 - fax npc regarding proble | ||
| SONY |
KX1901A
|
Ibm to 34 pin connector on monitor/ can not be connected | Customer wants to connect their ibm to the 34 pin connector. -hq comments: this monitor can not be connected to an ibm cga computer. only the kx2501a or kx1901a can be connected using the tmx701 or pc701connector cable. | ||
| SONY |
KX2501A
|
Ibm to 34 pin connector on monitor/ need to use tmx-701 | Customer wants to connect their ibm to the 34 pin connector. -hq comments: this monitor can not be connected to an ibm cga computer. using the tmx-701 or pc-701 connector cable. | ||
| SONY |
KX1901
|
Ibm to 34 pin connector on monitor/ can not be connected | Customer wants to connect their ibm to the 34 pin connector. -hq comments: this monitor can not be connected to an ibm cga computer. only the kx2501a or kx1901a can be connected using the tmx701 or pc701connector cable. | ||
| SONY |
KX2501
|
Ibm to 34 pin connector on monitor/ can not be connected | Customer wants to connect their ibm to the 34 pin connector. -hq comments: this monitor can not be connected to an ibm cga computer. only the kx2501a or kx1901a can be connected using the tmx701 or pc701connector cable. | ||
| SONY |
KPR46EX35
|
No child picture, r1139 missing on "v" board | No child picture. | ||
| SONY |
CCDTR200
|
No camera video or record/replace ic602, vc113 board | No video e-e only flashing gray raster. signal onmonitor had only sync and burst with a flashing raster. | ||
| SONY |
KV27V55
|
Sound from speakers when speaker turn off, volume was too hi | Customer complained that even though he turned off thespeakers some volume still came through his tv speakers. only on thea/v line not through the ant input.hq comments: customer had his vhs deck slv-585hf connected to the a/vinputs. playing back a tape | ||
| SONY |
CPD1730
|
Low brightness and cannot be adj via das / leaky q511 | Monitor exhibited low picture brightness. cathodes werecorrect but g2 voltage was low (200 volts). the emiter of q511 was 14volts, not 11 volts as described in the service manual. the op-amp driveic (ic505) pin 7 would not change when manipulating thi | ||
| SONY |
HCDC50U
|
Scraping sound from cd player | Cd's would scrape during play, causing cd's to skip. bypushing or pulling slider (ref. 107), i was able to eliminate problem.slider adjusts elevator height. the problem would re-occur when a discwas reinserted. -hq comments: without having the unit on |