☰

Sony Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: sony
Results: 20077
Make Model Symptom Problem Solution By
SONY CPD1320
Recommended screen cleaner
SONY CPD1304S
Recommended screen cleaner
SONY CPD1304
Recommended screen cleaner
SONY CPD1303
Recommended screen cleaner
SONY CPD1302
Recommended screen cleaner
SONY FD285
Tv-tuner does not lock ch, replaced ic-201 T.v. tuner will not lock on station just keeps skipping on andon.
SONY MDP700
Won't play cd's Plays ld's o.k. when cd is inserted sled motor travels tothe spindle, but chatters and no rotation on cd. problem appears to be a defective cd limit sw s902. replacing sw does not correct problem.
SONY KV27TW75
No part number for video in jack on a board,1-573-658-11 No part number for video or audio jacks on a board. thecomplete board must be ordered because of an intermittent jack?note: please get back to me as soon as possible. -hq comments: see page 63 of sm kv-27tw75 j401 1-566-846-11 s video
SONY D515
Need part # for adapter for aa batteries Customer claims that he needs an adapter in order to useaa batteries, because the batteries are much shorter than the rechargeablebattery. the manuals do not show any part number for an adapter. -hq comments: the adapter is built into the battery compa
SONY KV27TS32
Horizontal on top bending, adjusted yoke Customer complained about the horizontal being slanted on the top of screen.
SONY CDXU606
Unit jams, discs not returned fully to mag. (replace sw655) Unit would load disc, but then when you went to change disc(for example: from 1 to 5) the slider assembly would not return previousdisc all the way in to magazine. thus, when the elevator went up or down,the disc would hang up on the elevator assembly.
SONY CDXU404
Unit jams, discs not returned fully to mag. (replace sw655) Unit would load disc, but then when you went to change disc(for example: from 1 to 5) the slider assembly would not return previousdisc all the way in to magazine. thus, when the elevator went up or down,the disc would hang up on the elevator assembly.
SONY CDXU400D
Unit jams, discs not returned fully to mag. (replace sw654) Unit would load disc, but then when you went to change disc(for example: from 1 to 5) the slider assembly would not return previousdisc all the way in to magazine. thus, when the elevator went up or down,the disc would hang up on the elevator assembly.
SONY CDXU303RF
Unit jams, discs not returned fully to mag. (replace sw655) Unit would load disc, but then when you went to change disc(for example: from 1 to 5) the slider assembly would not return previousdisc all the way in to magazine. thus, when the elevator went up or down,the disc would hang up on the elevator assembly.
SONY CDXU303
Unit jams, discs not returned fully to mag. (replace sw655) Unit would load disc, but then when you went to change disc(for example: from 1 to 5) the slider assembly would not return previousdisc all the way in to magazine. thus, when the elevator went up or down,the disc would hang up on the elevator assembly.
SONY CDXU70
Unit jams, discs not returned fully to mag. (replace sw655) Unit would load disc, but then when you went to change disc(for example: from 1 to 5) the slider assembly would not return previousdisc all the way in to magazine. thus, when the elevator went up or down,the disc would hang up on the elevator assembly.
SONY CDXA55
Unit jams, discs not returned fully to mag. (replace sw655) Unit would load disc, but then when you went to change disc(for example: from 1 to 5) the slider assembly would not return previousdisc all the way in to magazine. thus, when the elevator went up or down,the disc would hang up on the elevator assembly.
SONY CDXA35RF
Unit jams, discs not returned fully to mag. (replace sw655) Unit would load disc, but then when you went to change disc(for example: from 1 to 5) the slider assembly would not return previousdisc all the way in to magazine. thus, when the elevator went up or down,the disc would hang up on the elevator assembly.
SONY CDXA55RF
Unit jams, discs not returned fully to mag. (replace sw655) Unit would load disc, but then when you went to change disc(for example: from 1 to 5) the slider assembly would not return previousdisc all the way in to magazine. thus, when the elevator went up or down,the disc would hang up on the elevator assembly.
SONY CDXU300
Unit jams, discs not returned fully to mag. (replace sw655) Unit would load disc, but then when you went to change disc(for example: from 1 to 5) the slider assembly would not return previousdisc all the way in to magazine. thus, when the elevator went up or down,the disc would hang up on the elevator assembly.