☰

Sony Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: sony
Results: 20077
Make Model Symptom Problem Solution By
SONY GDM17SE1
Picture is unstable when changing from text to graphics mode
SONY CPD1730
Picture is unstable when changing from text to graphics mode
SONY CPD1604S
Picture is unstable when changing from text to graphics mode
SONY CPD1430
Picture is unstable when changing from text to graphics mode
SONY CPD1320
Picture is unstable when changing from text to graphics mode
SONY CPD1304S
Picture is unstable when changing from text to graphics mode
SONY CPD1304
Picture is unstable when changing from text to graphics mode
SONY CPD1302
Picture is unstable when changing from text to graphics mode
SONY WMSXF39
Part recvd does not match exploded view X33672101 should include all chassis parts, but comes as aempty chassis. -hq comments: kcps checked with wrpc on this problem. wrpc checked theirstock and confirmed your report: wrpc stock was wrong. the correctedinventory will be sent to kcps from wrpc
SONY WMSXF10
Different mechanism deck assy The computer shows a replacement number for a3013575a(mechanism). the new number is x33655981. this mechanism has a differentplate lock (ref no. 104, page 16) and the switch s304 is never turned on. -hq comments: kcps faxed wrpc and sp group in tokyo
SONY WMF2078
Memory loss of presets when lid is opened When lid is opened, memory loss of presets occurs. 2 unitswith same problem, same model. we cannot confirm this problem.
SONY WMAF79
Chassis assy different from chassis in defective unit. The chassis (a3163146a) is different from the chassis insidethe defective unit. there are two different chassis with the same partnumber. the metallic lever on the chassis is bent differently and has adifferent shape. -hq comments: kcps faxed wrpc and
SONY TCMS67V
Kcp doesn't acknowledge part Front cabinet (ref.# 17 page 9) not listed with kcp. -hq comments: kcps was notified and the part is now registered at kcps.thanks for the info.
SONY ICFIR7
Wrong part # for remote battery lid Part # in manual is wrong. 3-365911-01 is battery lidfor speaker.
SONY D125
Unit susceptible to mech. shock This unit seems very susceptible to mech shock. are thereany improved dampers available? -hq comments: please check the color of the dampers, if they are blue(p/n 4-944-338-01), then change them to the new improved black dampers(p/n 4-947-759-01).
SONY CFSW470
Pinch rollers not engaging on deck a Deck a pinch rollers will not fully engage, because spring 109has become mis-aligned.
SONY CFSW470
Mechanical noise, deck a while playing reverse side Take up reel slips while playing reverse side on deck a, sound like a clicking noise. spring (123) falls off and removes the tension that keeps the take up engaged.
SONY CFSW470
Both pinch rollers engage at the same time The rec/pb wires fall out of their holder and become lodgedabove the pinch roller assy. (269). in play mode the wire forces bothrollers down.
SONY CFSW308
No record When recording, record lever (part #72) activates the slideswitch s301 (rec/pb sw) but becomes of the nature of the lever, s301 isnot pushed-in all the way causing it not to record.
SONY CFD768
Rectangular nylon piece attached to item #501 (slider) Nylon piece adhered to item #501 slips off and jams deck.nylon piece is not in pictorial page 77. purpose of nylon piece isunknown.