Sony Repair Tips
Search: sony
Results: 20077
Results: 20077
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
CFD768
|
No auto reverse on deck b/lout clicking noise | When the unit was plugged in, deck b would make a loudclicking noise and would not auto reverse. found the spring for autoreverse (#510 in manual) gone and end of gear teeth stripped. (part#337436501). | ||
| SONY |
SLV585HF
|
All characters appear on screen after awhile: ic601 ma82 bd | After playing for awhile, all the characters show up on the screen. | ||
| SONY |
SLV400
|
Effects of digital audio in cable system | The unit takes more time to auto program the cable channelswhen digital audio is used in the cable system. | ||
| SONY |
SLV700HF
|
Effects of digital audio in cable system | The unit takes more time to auto program the cable channelswhen digital audio is used in the cable system. | ||
| SONY |
SLVR1000
|
Effects of digital audio in cable system | The unit takes more time to auto program the cable channelswhen digital audio is used in the cable system. | ||
| SONY |
SLV900HF
|
Effects of digital audio in cable system | The unit takes more time to auto program the cable channelswhen digital audio is used in the cable system. | ||
| SONY |
SLV750HF
|
Effects of digital audio in cable system | The unit takes more time to auto program the cable channelswhen digital audio is used in the cable system. | ||
| SONY |
D36
|
Defective headphone jack (no right channel) | Only one channel is heard through headphone jack. tracedaudio from ic304 up to the jack. had audio all the way until the jack.checked jack and found trace lifted on one side for right channel. | ||
| SONY |
D34
|
Defective headphone jack (no right channel) | Only one channel is heard through headphone jack. tracedaudio from ic304 up to the jack. had audio all the way until jack.checked jack and found trace lifted on side for right channel. | ||
| SONY |
CCDTR500
|
Wrong part number for ez clip tool/use j-6082-244-a | The part number for the ez clip jig in the service manual isincorrect. it is listed as j-6082-224-a. | ||
| SONY |
HCDH1600
|
No reception from radio - r9001 open p/n 1-212-942-00 | No am/fm reception. tuner cannot lock onto station. i found12v supply from q283 was missing. the 12v supply was missing becauser9001 was open at power board. pin 11 of ic801 was at 22.5v. | ||
| SONY |
WMSXF39
|
No clock/no radio/no display - resolder connector cn401 | The clock, radio, and stop watch were not working and there was no display. checked ribbon cable connector (cn401) on the displayboard. it looks okay, but no voltage was coming onto the board. | ||
| SONY |
HSTD107R
|
Little or no bass or buzzing on cd input - cn1001 gnd open | Cd input signal is distorted. it has little or no bass andbuzzing in the back ground. upon measuring resistance at cn1001, i foundout the ground was open. during inspection process, this pin got bent anddid not go through the hole in the pcb. | ||
| SONY |
HCDH300
|
No am/fm functions - tuner board not seated correctly | Unit had no am/fm. after taking the case off, i found outthat the tuner board had come away from the main board. this probablyhappens due to mishandling of the unit. | ||
| SONY |
CDPCX100
|
Does not play cd (reposition bu fulcrum plate, ref. 107) | Turntable rotates but does not load disc. found bu fulcrumplate (ref. 107) jarred out of position. | ||
| SONY |
D802K
|
Defective battery terminal (deformed) - move +ve batt wire | Unit has no battery power. checked battery terminals andfound spring (a) burnt. checked battery wires and found them shorted.the positive wire is run under the spring which is the negative side ofthe batteries, thus shorting out the batteries. | ||
| SONY |
D802K
|
Lid assy, upper window loose | The window on lid assy is loose from the rest of the lid.some of the new lids also have the window popped loose. we have seen thisproblem on several models. | ||
| SONY |
D34
|
Sled stuck (no movement) - replace l503, p/n 1-412-032-11 | Optic will not track in or out. put unit in test, still hadno tracking. Ωed the motor, it was ok. checked l503 and found it to beopen, or broken. | ||
| SONY |
D36
|
Door will not stay open - straighten bent spring (c), ref 7 | Door will not stay all the way open, keeps dropping down.checked spring in cabinet by door, hinge was found bent. | ||
| SONY |
D111
|
Sled stuck - screw assy stuck (ref 51) | Unit has no sled movement. checked voltage on ic504 and theywere ok, all the way out to motor. turned screw assy by hand and found itto be bent. |