☰

Sony Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: sony
Results: 20077
Make Model Symptom Problem Solution By
SONY KV32XBR95
No child picture in rf mode, resoldered r2062 (p3 board) No child picture in rf mode, in video main and child picture ok.
SONY KV20V50
Picture distorted no vert sync, q301 collector cold soldered No sync, picture distorted
SONY KV27V55
No picture, resoldered q591 hor out ("d" board) No picture.
SONY KV8AD10
No sound, resoldered ic201/pins 1, 2, 3, and 4. No sound
SONY SLV555UC
Dead set: replace c105 in power supply. The unit was dead. the ovp diode, d207, was found to beshorted. this was caused by the supply running at too low a frequency,about 20 khz, and transferring too much power to the secondary. theproblem was caused by c105. it had opened.
SONY CDXU6260
Disc jams during loading (re-seat st lever, ref. 136) When cd is inserted into unit, it goes about halfway in andthen stops. the unit then begins to make clicking/grinding noises beforeejecting cd.
SONY CDX5460
Disc jams during loading (re-seat st lever, ref. 136) When cd is inserted into unit, it goes about halfway in andthen stops. the unit then begins to make clicking/grinding noises beforeejecting cd.
SONY CDX5260
Disc jams during loading (re-seat st lever, ref. 136) When cd is inserted into unit, it goes about halfway in andthen stops. the unit then begins to make clicking/grinding noises beforeejecting cd.
SONY KV32XBR55
Static, grouned micro and memory chip Pressing video mode, set would shut down and then come on inthe rf mode. can not get into video mode. master tv in las vegas hadthe problem.
SONY KV32XBR96S
Fuse inside speaker box part number, 1-518-645-11 Part number for the fuse (lamp) inside the speaker box ismissing from the service manual. -hq comments: the part number is 1-518-645-11.
SONY KV27XBR96S
Fuse inside speaker box part number, 1-518-645-11 Part number for the fuse (lamp) inside the speaker box ismissing from the service manual. -hq comments: the part number is 1-518-645-11.
SONY KV32XBR95S
Fuse inside speaker box part number, 1-518-645-11 Part number for the fuse (lamp) inside the speaker box ismissing from the service manual. -hq comments: the part number is 1-518-645-11.
SONY TAAV431
P/n for power bd complete incorrect, see s/m correction-1 The part number for the power board complete shown on page 26of the service manual (ref. 57) is incorrect.
SONY KV27TS32
Jvc and hitachi codes missing from om, add code 35, 36 Customer could not get their jvc vhs deck to operate usingthe code 16 as stated in the manual. noticed their rmy-113 remotestated to use either 16 or 35. when they tried code 35 it worked.
SONY KV27TS29
Jvc and hitachi codes missing from o/m, add codes 35, and 3 Customer could not get their jvc vhs deck to operate usingthe code 16 as stated in the manual. noticed their rmy-113 remotestated to use either 16 or 35. when they tried code 35 it worked.
SONY KV32TW78
Jvc and hitachi codes missing from o/m, add code 35,36 Customer could not get their jvc vhs deck to operate usingthe code 16 as stated in the manual. noticed their rmy-113 remotestated to use either 16 or 35. when they tried code 35 it worked.
SONY KV32TW77
Jvc and hitachi vcr codes missing from o/m, add code 35, 36 Customer could not get their jvc vhs deck to operate usingthe code 16 as stated in the manual. noticed their rmy-113 remotestated to use either 16 or 35. when they tried code 35 it worked.
SONY KV32TS46
Jvc and hitachi vcr codes missing from o/m, add code 35, 36 Customer could not get their jvc vhs deck to operate usingthe code 16 as stated in the manual. noticed their rmy-113 remotestated to use either 16 or 35. when they tried code 35 it worked.
SONY KV32TS36
Jvc and hitachi vcr codes missing from o/m, add code 35, 36 Customer could not get their jvc vhs deck to operate usingthe code 16 as stated in the manual. noticed their rmy-113 remotestated to use either 16 or 35. when they tried code 35 it worked.
SONY KV27TW77
Jvc and hitachi codes missing from o/m, add code 35, 36 Customer could not get their jvc vhs deck to operate usingthe code 16 as stated in the manual. noticed their rmy-113 remotestated to use either 16 or 35. when they tried code 35 it worked.