Sony Repair Tips
Search: sony
Results: 20077
Results: 20077
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
CDPC425
|
Noise in audio (replace ic301, p/n 8-752-337-26) | Digital noise heard in audio out. another servicer hadreplaced ic302 and ic303 before sending in to us. i have had other unitsthat have had similar problems w/audio noise such as static or no audioat all. | ||
| SONY |
CDPC325
|
Noise in audio (replace ic301, p/n 8-752-337-26) | Digital noise heard in audio out. another servicer hadreplaced ic302 and ic303 before sending in to us. i have had other unitsthat have had similar problems w/audio noise such as static or no audioat all. | ||
| SONY |
CDPC225
|
Noise in audio (replace ic301, p/n 8-752-337-26) | Digital noise heard in audio out. another servicer hadreplaced ic302 and ic303 before sending in to us. i have had other unitsthat have had similar problems w/audio noise such as static or no audioat all. | ||
| SONY |
CDPC625
|
Noise in audio (replace ic301, p/n 8-752-337-26) | Digital noise heard in audio out. another servicer hadreplaced ic302 and ic303 before sending in to us. i have had other unitsthat have had similar problems w/audio noise such as static or no audioat all. | ||
| SONY |
KV32XBR95S
|
Schematic diagram of crt pin allocations are incorrect | The schematic diagram of the crt pin allocations, on page114, are incorrectly labeled. the c board lay out is correct. -hq comments: please refer to the schematic diagram located in theservice manual of the kv-27xbr96s for the correct pin allocationsch | ||
| SONY |
KV27XBR95S
|
Schematic diagram of crt pin allocations are incorrect | The schematic diagram of the crt pin allocations, on page114, are incorrectly labeled. the c board lay out is correct. -hq comments: please refer to the schematic diagram located in theservice manual of the kv-27xbr96s for the correct pin allocation | ||
| SONY |
KV32XBR90S
|
Schematic diagram of crt pin allocations are incorrect | The schematic diagram of the crt pin allocations areincorrectly labeled. the c board lay out is correct. -hq comments: please refer to the schematic diagram located in theservice manual of the kv-27xbr96s for the correct pin allocationschematic. a ser | ||
| SONY |
KV32TS46
|
D612 p/n and description correction | D-612 on page 112 is listed as d5sc4mr p/n 8-719-031-80 this is incorrect. -hq comments: the correct description and part number is listed below: d612 d5sc4m 8-719-031-79 | ||
| SONY |
KV32TS36
|
D612 p/n and description correction | D-612 on page 112 is listed as d5sc4mr p/n 8-719-031-80 this is incorrect. -hq comments: the correct description and part number is listed below: d612 d5sc4m 8-719-031-79 | ||
| SONY |
KV27TS36
|
D612 p/n and description correction | D-612 on page 112 is listed as d5sc4mr p/n 8-719-031-80 this is incorrect. -hq comments: the correct description and part number is listed below: d612 d5sc4m 8-719-031-79 | ||
| SONY |
KV27TS29
|
D612 p/n and description correction | D-612 on page 112 is listed as d5sc4mr p/n 8-719-031-80 this is incorrect. -hq comments: the correct description and part number is listed below: d612 d5sc4m 8-719-031-79 | ||
| SONY |
WMGX90
|
Intermittent record - resolder record switches | Intermittently would not record. | ||
| SONY |
DD8
|
Dark lcd display, not adj via user controls/rv701 open | Dark lcd display not adjustable to a good viewable intensitywith contrast control. | ||
| SONY |
KV32XBR96S
|
Intermittent caption character error, change r3443 value | Intermittly the caption character will turn into a white orblack box. -hq comments: this symptom depends on the video siginal level.changing the resistance value of r3443 from 470Ω to 100Ω willcure the problem. p/n 1-216-025-00 100Ω 1/10w | ||
| SONY |
KV27XBR96S
|
Intermittent caption character error, change r3443 value | Intermittently the caption character will turn into a whiteor black box. -hq comments: this symptom depends on video siginal level.changing the resistance value of r3443 from 470Ω to 100Ω willcure the problem. p/n 1-216-025-00 100Ω 1/10w | ||
| SONY |
CCDF301
|
Data transfer from computer to camera stalls on address 6 | When using the lanc jig to transfer data from the computer tothe camera, the program would fail with a communications error whenever itgot to address 6. this is a read-only location for the battery downvoltage adjustment. | ||
| SONY |
CCDV701
|
Spurious dew sensor/remove lithium battery - reinstall | Had a continuous dew indication. replaced dew sensor with nochange. | ||
| SONY |
PSFL99
|
Arm drops too fast - tighten lifter assy ref. #217 | Tonearm drops onto record without any damping. | ||
| SONY |
XRU880
|
Replacement keyswitch different from original | Replaced switch with one from diagnostic board. -hq comments: this problem was also reported on the xr-u770. npcchecked with tokyo and found that the part number in the manual iscorrect, but that the switch vendor supplied the wrong switches. npc hasp | ||
| SONY |
CCDTR101
|
Possible poor bass response at high sound levels | Customer was taping marching band with ccd-tr101 camcorder andnoticed poor bass response compared to other camcorders. |