☰

Sony Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: sony
Results: 20077
Make Model Symptom Problem Solution By
SONY CDPC35
Legs of power transformer do not match holes on pcb The power transformers supplied by npc (p/n 1-449-954-11) havelegs which do not line up with the holes on the power pcb. -hq comments: tokyo has advised that the transformer can be adapted tothe power board by trimming the two leads that do not match th
SONY CCDFX510
Unit is intermittently dead or has no functions/w651 The unit is intermittently dead after assembly during repair.i found you can flex w573 or w561 to introduce the problem. the cable isbreaking at the end that plugs into the cs-35 board.
SONY DTX10
Part number for led holder (3-365-233-01) The service manual shows the plastic bracket which holds theled d901 as not supplied. -hq comments: the part number for the holder is 3-365-233-01.
SONY CDX5180
Intermittent no operation (resolder q502 collector) The unit will intermittently not turn on (no functions, nodisplay). found no led b+ and no lamp b+ when the main board was flexed.
SONY ITA4000
Unit intermittently dials wrong number Unit intermittently dials the wrong number in the tone dialingmode.
SONY GV300
Installing new lcd The horseshoe light is on the screen when lcd is replacedbecause the new lcd's are being stocked without curtains (ref 58).
SONY KV27XBR95S
Intermittent color dots on screen, replaced comb filter After about five minutes of play, the picture showed colordots on the screen. after a while, the picture was unwatchable and thecolor started to bleed off of images.
SONY STRD2090
Incorrect pin configuration layout, ic125 The semiconductor pin configuration in the beginning of s/mdoes not match that of the on-screen schematic or the on-screen boardlead layout.
SONY STRD1090
No pin out for ic150 shown in s/m When installing the new ic150, i found all ic pin outs infront of s/m except ic150.
SONY STRD1090
Missing ic 417 and adjoining parts This unit is missing ic417, x401, c464, c462 and jumpernumbers 443, 437, 435, and 472. these are all surround board components.although the surround works, why are all these parts missing? on anotherreceiver, strd1090, serial number 1800140, these part
SONY KV32TS46
Half moon, or rainbow strips in picture, replace ic-501 Screen displays either a half moon with rainbow stripes, or the entire screen contains rainbow strips at a lower overall brightness level.brighter towards the bottom of the screen.
SONY KV32TS36
Half moon, or rainbow strips in picture, replace ic-501 Screen displays either a half moon with rainbow stripes, or the entire screen contains rainbow strips at a lower overall brightness level.brighter towards the bottom of the screen.
SONY KV27TS36
Half moon, or rainbow strips in picture, replace ic-501 Screen displays either a half moon with rainbow strips, or theentire screen contains rainbow strips at a lower overall brightness level.brighter towards the bottom of the screen.
SONY KV27TS32
Half moon, or rainbow strips in picture, replace ic-501 Screen displays either a half moon with rainbow stripes, or the entire screen contains rainbow strips at a lower overall brightness level.brighter towards the bottom of the screen.
SONY CDPH3750
Does not read or spin disc (replace ic209, p/n 8-752-352-93) There was no focus search, no laser, no spindle action. theunit does not spin the disc.
SONY DXAH2750
No fl display- led's light - faulty r991, 1-219-138-91 I found open r991 on power board pcb.
SONY KV27TS29
Half moon, or rainbow strips in picture, replace ic-501 Screen displays either a half moon with rainbow stripes, or the entire screen contains rainbow strips at a lower overall brightness level.brighter towards the bottom of the screen.
SONY STRD2070X
Right rear channel has very low output - ic704 8-759-502-32 The right channel on the rear surround was very low. itrigger-shocked ic704 and the unit started playing at normal volume.the unit played for two days with no problems.
SONY HST221
No power - faulty power transformer t901 p/n 1-450-802-11 The unit would click on but there was no display or audio.
SONY TCWR8ES
Both a and b decks will not play - q825 faulty 8-729-801-93 Motors a and b were not working. i could hear the solenoidskick when i pressed the play keys.