Sony Repair Tips
Search: sony
Results: 20073
Results: 20073
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
KV27XBR60
|
Anode connector missing, p/n 1-540-032-32, sb 108 | When replacing the a board, the anode wire from the flybackis missing. is there a part number for it? -hq commnets: please order the anode cable, part number 1-540-032-32.this has been covered by service bulletin number 108. future boards willbe suppl | ||
| SONY |
KV27XBR50
|
Anode connector missing from new "a" boards, replace fbt | When replacing the a board, the anode wire from the flybackis missing. is there a part number for it? -hq comments: please disregard the flyback that might come on the re-placement board. reinstall either a new flyback or the one from the oldboard. | ||
| SONY |
KV27XBR15
|
Anode connector p/n missing, 1-540-006-32 see s/b 108 | When replacing the a board, the anode wire from the flybackis missing. is there a part number for it? -hq comments: please order part number 1-540-006-32 which is theanode cable. this was covered in service bulletin number 108. futureboards will come w | ||
| SONY |
KV27XBR10
|
Anode connector missing, p/n 1-540-006-32 see sb 108 | When replacing the a board, the anode wire from the flybackis missing. is there a part number for it? -hq comments: please order part number 1-540-006-32 which is the anodecable. future boards will have the cable with the board. service bulletinnumber | ||
| SONY |
KV32HSR10
|
Anode connector missing from "a" board, 1-540-006-32 | When replacing the a board, the anode wire from the flybackis missing. is there a part number for it? -hq comments: please order part number 1-540-006-32 which is the anodecable. future boards will come with this cable. | ||
| SONY |
KV32XBR70
|
Anode connector missing, 1-540-006-32 | When replacing the a board, the anode wire from the flybackis missing. is there a part number for it? -hq comments: please order the anode cable, part number 1-540-006-32.future boards will come with the anode cable. | ||
| SONY |
KV32XBR65
|
P/n for anode connector missing, 1-540-006-32 | When replacing the a board, the wire from the flyback ismissing. is there a part number for it? -hq comments: please order part number 1-540-006-32, which isthe anode cable. future boards will come with this board. | ||
| SONY |
KV32XBR15
|
Anode connector missing, 1-540-006-32 | When replacing the a board, the anode wire from the flybackis missing. is there a part number for it? -hq comments: please order part number 1-540-006-32 which isthe anode cable. future boards will have the cable with the board. | ||
| SONY |
KV32XBR15
|
Set in-operative, replaced ic-651, and q604 | Unit is inoperative. ic-651 was found defective. | ||
| SONY |
SLV575UC
|
Poor or distorted ep playback | Unit plays back ep recordings very noisy or distorted. sprecordings playback ok. | ||
| SONY |
KV32XBR10
|
Anode connector missing, 1-540-006-32 | When replacing the a board, the anode wire from the flyback ismissing. is there a part number for it? -hq comments: please order part number 1-540-006-32 which is the anodecable. future boards will come with the cable. | ||
| SONY |
KV32XBR50
|
Anode connector missing, p/n 1-540-006-32 | When replacing the a board, the anode wire from the flybackis missing. is there a part number for it? -hq comments: please order the anode cable, part number 1-540-006-32.this cable will come with future boards. | ||
| SONY |
WMF2031
|
Wrong part number in service manual for ic-1 | The p/n in the s/m (8-752-908-89) is incorrect for ic-1. | ||
| SONY |
SPP320
|
Unit disconnects line intermittently | Disconnects after dialing. problem does not occur at ssc. | ||
| SONY |
KV27TS20
|
Blows fuse, replace crt | Upon turn on line fuse would blow. could bring up to 80vac.the horizontal waveform is ok. with ac up to 100vac output would distort.any higher fuse would blow. disconnect c board and was able to bring upto 120vac. hookup chassis to another tube evert | ||
| SONY |
KV1311CR
|
Function buttons and remote inoperative, ic-104, and c-129 | Unit showed picture but no control with function buttonsexcept power on. remote also is inoperative. | ||
| SONY |
KV13TR24
|
Unit goes into shutdown immediately at power on,r563 replace | Unit would shut down upon turn on. opening the base of q-562,set would come on. found 23vdc on the collector of q-561 which meant itwas on. measured the emitter of q-561 and found 134.4vdc (normalvoltage = 133). the base read 133.8 volts (normal volt | ||
| SONY |
KV13TR14
|
Vertical collapse | At full voltage (120vac) vertical collapsed. lowering thevoltage to 95 a.c brought about an almost full deflection but you couldsee horizontal interference on the edges of the color bars. found the10.4 volt (vcc bias line, pin 4 of ic-301) filter cap ( | ||
| SONY |
BC300
|
Only charges battery one/charge led will not light | Unit would charge battery placed in position 1 but would notlight charge led or charge batteries in positions 2 or 3. | ||
| SONY |
CCDV5000
|
Incorrect part number for af-dm ass'y | The part number listed in the manual for the af-dm ass'y isa-7030-171-a. this part number is no good in kcp or rpc. |