Sony Repair Tips
Search: sony
Results: 20072
Results: 20072
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SONY |
STRVX450
|
Scrambled display then blanks out and mutes after 10 sec | Ic301 crashes. can be reset manually by grounding pin 33.you could preset a station (if you are quick), then the proper displayfreq. would show for a short while. one by one the segments of thedisplay would grow dim quickly, then become scrambled. aft | ||
| SONY |
WM7
|
Substitute headphone jack does not fit | The jack substituted (p/n 1-507-787-11) is different from theoriginal jack (p/n 1-507-787-00). the jack substituted does not fit onthe main pc board because the new jack consists of 3 pins while the oldjack consists of 5 pins. -hq comments: part number | ||
| SONY |
WMF65
|
Shut off | There is no part number for a reference #222 (pinch leverassy) in the service manual. -hq comments: the part number is x-3320-311-1. we will issue a s/b. | ||
| SONY |
CPD1201
|
Color rgb monitors | Set shuts down at turn on. | ||
| SONY |
CDP30
|
No audio output | No focus. | ||
| SONY |
CDP30
|
Intermittent skipping | Unit skips intermittently, hot or cold. usually skips large segments of time. also, when ams-ing through long track, clv would unlock and relock several times, slowing search time between tracks. | ||
| SONY |
WMF5
|
Motor vibration causing flutter | Excessive flutter (3 units). | ||
| SONY |
STRAV460
|
No display, no sound; only standby led on | Ic301 could not be reset. | ||
| SONY |
SLHFR70
|
Part number for ic301 | Parts list problem. ic301 calls for cxp5016-009s, however,units have cxp5016-006s. kc has no -006s in stock. -hq comments: ic301 is a cxp5016. the -009s and -006s are interchange-able. these four digits indicate the oem code only. | ||
| SONY |
TCFX77
|
Will not engage play solenoid - will not stay on | This unit had two problems. 1) unit would not engage playsolenoid. found d905/43v rectifier to be cold soldered. 2) would notstay in play. found ic507 defective at pin 11. this would not allowinput of the rotation detection signal to ic501/pin 32 sh | ||
| SONY |
SLHF500
|
No tuner function | This unit would not light the channel numbers and no tunerfunctions were working. we found ic301/pin 16 to be about 2v. this wascaused by a leaky q305. | ||
| SONY |
CDP302
|
Wrong part # | Page 65 of s/m shows ic151, should be ic101. p/n should be8-752-010-90, not 8-759-600-02. -hq comments: we will issue a s/b. | ||
| SONY |
SLHF900
|
Need p/n for plastic bracket | Need part # for plastic bracket. -hq comments: unfortunately, this part is not available for replacement.it may be possible to get a spare part from a scrap unit from therefurbishing center in compton. | ||
| SONY |
SLHFR70
|
Emergency shutdown in reverse skipscan, review modes only | In review and skipscan reverse, machine would shutdown.found no signal at syscon ic401, pin 8. | ||
| SONY |
CDX5
|
Unusual operation when display, rew or ams key hit | Whenever i operate any of the keys, the following happens:1) display shows 0. 2) the cd mechanism goes into pause (led illumi-nates). 3) the sled returns to bottom of the rack. 4) muting relay ry451energizes. replaced the master cpu mb88501-298m with | ||
| SONY |
KV2141R
|
P/n for trinitron logo rgb dots | Customer complains that she ordered speaker grille p/n4-323-603-00 and rgb trinitron logo color dots were not mounted. servicemanual shows them as mounted, no part numbers are given for dots alone.please advise of available complete, or p/n for dots alo | ||
| SONY |
SLHFR70
|
No audio | Any combination of two channels can be tuned in, but onlytwo. no sound at any time. four units have been reported to have failedin this way. | ||
| SONY |
BMC110
|
Poor focus | C15 1.5 x 160 leaking causing focus problem. -hq comments: c15 is used in the dc-dc converter. this capacitor inhv701 is connected to pin 3 (120v) which controls the focus regulator.your tape is being returned. | ||
| SONY |
SRSF10
|
Incorrect part | Please note the enclosed parts. the control is correct exceptthat this unit requires that there be a screw mount instead of a shaft.screw #38 mounts knob #37 to it. please investigate this matter for meand forward the correct control. -hq comments: th | ||
| SONY |
CDP101
|
Intermittent tracking | This unit had an intermittent problem tracking the disc. |