Thomson Repair Tips

Search: thomson
Results: 227

Make	Model	Symptom	Problem	Solution	By
THOMSON	VARIOS TX807C/CS	Oscillates horizontally mat does not start	Add a 15k smd resistance between base and collector of the tl031		TECNICA ORIMA
THOMSON	VARIOS ICC17	LED lights up red power supply does not start	Power supply oscillator blocking	Replace in power supply dp42-tp42-tp44	TECNICA ORIMA
THOMSON	VARIOS ITC008	Vertical amplifier ic heats up a lot and burns out	Rf008 sold out	Replace with the same value depending on the TRC installed on the TV	TECNICA ORIMA
THOMSON	VARIOS ITC008	After operating for 1-2 hours the image becomes defective and the sound is noisy as outside the norm	Fi fi010 filter with defect	Replace with new same	TECNICA ORIMA
THOMSON	VARIOS ITC008	After running for 1 hour, it becomes unstable today. and lose color	Cv001 1uf 6,3v ceramico smd com fugas	Replace with equal value	TECNICA ORIMA This email address is being protected from spambots. You need JavaScript enabled to view it.
THOMSON	VARIOS ICC17	TV doesn't start with TLC. or You have to get very close to remove the keyboard, everything is ok.	5.1v zener that regulates the IR receiver may be altered if the 5v voltage is changed	Replace 5.1v zener depending on mod.do tv dk01-dk05-dk07-dr01	TECNICA ORIMA
THOMSON	21" ICC17	Systematic burnout transistor tl32	Excessive heating of the tl32	Replace r32 equally and alter r135 from 4.7r to 33r	TECNICA ORIMA
THOMSON	VARIOS ICC17	The transistor sl.tp50 buh516th16 burns out without apparent cause	Replace tp50 with the buh1215 version and 10k rp55 with 8k20.1w		TECNICA ORIMA
THOMSON	ICC17 ICC17	Led lit red inactive power supply	Transistor tl 59 shorted	Replace with the same	TECNICA ORIMA
THOMSON	ICC17 ICC17	Low contrast image	Transistor tl02 shorted by tsl discharges	Substituir tl02 tsl	TECNICA ORIMA
THOMSON	ICC17 ICC17	In the mp ir02-3.50g version, after being on standby for 5 minutes, it stops receiving orders from the tlc and the front panel	Add a resistance 39r 0.25w between pin 8 of ic ir03 and rr16		TECNICA ORIMA
THOMSON	VARIOS ITC008	The/image only with/grain	5v is missing on pins 6-7 of the tuner-	Substituir dp036-1n4001	TECNICA ORIMAS
THOMSON	VARIOS ITC008	With dark mat-screen	Diodes dl004 and dl015 shorted - replace		TECNICA ORIMA
THOMSON	VARIOS ITC008	If001 vertical ic heats up a lot	Rf008 1.5r exhausted - replace		TECNICA ORIMA
THOMSON	VARIOS ETC210	Power supply does not start when cold, heating power supply area starts	Photo acupller ip030 and ip070 with deficiency	Replace ip030 and ip070	TECNICA ORIMA
THOMSON	ICC20 ICC20	It takes a long time to start up and yet it gives code 2 6 which means "tube does not heat up in time"	The memory no longer sets the correct time, change ll200, "remove 5 turns from the coil"	"remove 5 turns from the coil" (ll200)	This email address is being protected from spambots. You need JavaScript enabled to view it.
THOMSON	29DF42E - S ICC20	It takes a long time to start up and yet it gives code 2 6 which means "tube does not heat up in time"	The memory no longer sets the correct time, change ll200, "remove 5 turns from the coil"	"remove 5 turns from the coil" (ll200)	This email address is being protected from spambots. You need JavaScript enabled to view it.
THOMSON	RCT3003 CHASSIS TX91	Image with grain via tuner, via scart perfect image	Replace c.electr.perto do tuner and solve or tuner not inside
THOMSON	TX91	Vertical position. moved 10 cm upwards	Tl 13_ bc338 line of 13 v. defective
THOMSON	20MG130G CHASSIS TX807C.	Does not turn on. 8v and 3.2v are missing on pin 1 of the tda9554ps.	Defective tda9554ps brings down the ic ip090 (stv8130).