Toshiba Repair Tips
Search: toshiba
Results: 5592
Results: 5592
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| TOSHIBA |
TV2157 BFS
FS2A LEM7 |
Vertical closed and there was no vertical exit | There were 2 broken lines at the foot of the varicap | Weld | Eletroclaudio Aguas Belas PE |
| TOSHIBA |
TV2157 BFS FS2A
LEM7 |
Image with different color half green | R230 smd of 220r on the foot, from micro | Replace | Eletroclaudio Aguas Belas PE |
| TOSHIBA |
2086MMS
U17 |
Horizontal outlet heating up and burning | It was the fake j6806d horizontal output, I put the d2624 in and it was ok. | Eletroclaudio Aguas Belas PE | |
| TOSHIBA |
TV2916
|
Horizontal outlet burnt or burning | Changing the c 416 - always change it when changing the sh | Master Eletronica | |
| TOSHIBA |
TV2157
|
Screen with only blue blurring | Change q906 smd of kinescope board | Master Eletronica | |
| TOSHIBA |
TV2084
U13 |
This TV had no sound + it doesn't generate high voltage and it lit the filament | Check the horizontal output note: test on the 1x scale | Roberto | |
| TOSHIBA |
TV2050MAV
U17 |
Fica so em stand bay | Check the horizontal output note: test on the 1x scale | Roberto | |
| TOSHIBA |
TV205MAV
U17 |
It just stays in stand bay and doesn't generate | Check the horizontal output note: test on the 1x scale | Roberto | |
| TOSHIBA |
2056M
U6 |
Black stripe on the left side of the trc. | Dz 302 short, sandcastle pulse. changed, the TV returned to normal. (resolved) | lucas40 | |
| TOSHIBA |
2998
|
Turns on normally, after a few minutes a blue pattern starts on the screen like interference, it can even lead to a complete blue screen | Kinescope board diode 1n 4148 | ||
| TOSHIBA |
2112DN
|
Doesn't start | Tda4601 shorted and disconnected pin 36 ica01 (cxp80420) | ||
| SEMP TOSHIBA |
TV2083BAV
U10 |
Off when volume increases power supply oscillating | Dido zener d876 de 5, shv e p876 smd alterado | Replace | Eletroclaudio Aguas Belas PE |
| TOSHIBA |
TV 2977 TV2177
|
Burning of the horizontal outlet | R 851 220k changed making power supply change | Replace it | CARLOS |
| TOSHIBA |
TV2015
U17 |
Just hissing sound without video and filament doesn't light up | Change without testing q404 | JOSIMAR | |
| TOSHIBA |
TV 2987
... |
TV turns on and off (vertical closed) | R327 aberto | Replace r327 and vertical capacitors | lord |
| SEMP TOSHIBA |
TV2050 -TODOS
|
Low hoarse sound, on some devices the image expands into greenish tones | Q906 no gain (polarized) | Replace q906 a smd on the kinescope board (tube) | WAGGUINHO |
| TOSHIBA |
TV1483
U14 |
White image and menu does not work | Qa02 memory | Replace qa02 (24c04) | andlss |
| TOSHIBA |
TV2091
U15 |
Turns on and off.repeatedly | Transistor posiçao q430 | Replace directly measuring it is good | eletronica newtec |
| TOSHIBA |
MS 7303CD
|
Everything works but the display doesn't light up | 100uf 50v ce910 sold out | Replace | Eletroclaudio Aguas Belas PE |
| TOSHIBA |
MS 7303CD
|
Off, doesn't turn on | D909 at power supply shorted | Replace | Eletroclaudio Aguas Belas PE |