Toshiba Repair Tips
Search: toshiba
Results: 5592
Results: 5592
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
TOSHIBA |
LEM 5
LEM 5 |
Does not turn on intermittently | Diodo d 840 5v6 | Replace d 840 | |
TOSHIBA |
2998
LEM4 |
Partial closed vertical | 5v regulator | Ic 830 | ITAN,PARELHAS RIO DE JANEIRO |
TOSHIBA |
2998
|
Horizontal fallen | Change c214 connected to tb 1275 | ITAN,PARELHAS RIO DE JANEIRO | |
TOSHIBA |
UNIVERSAL 14
|
Noise at the power supply | C880 swap for a 100k one | ITAN,PARELHAS, RIO DE JANEIRO | |
TOSHIBA |
29
LEM 3A |
Very low sound | Transistor q 625 | Replace q 625 | Itan,Parelhas ,Rio de Janeiro |
TOSHIBA |
2998
|
Power supply oscillating, with high voltage in the secondary | D 802 short | Itan,Parelhas ,Rio de Jneiro | |
TOSHIBA |
UNIVERSAL 14
UNI 14 |
Turns on and off by itself | D448 next to the fly back | Replace it is flashing | Itan,Parelhas ,Rio de Janeiro |
TOSHIBA |
TV3488
LEM 4R |
Blue fabric | Diodo d 621 cfuga | C621 play | Itan,Parelhas ,Rio de janeiro |
TOSHIBA |
UNIVERSAL 6
UNIVERSAL 6 |
Doesn't start | C419 open | Itan,Parelhas ,Rio de janeiro | |
TOSHIBA |
LEM 4
LEM 4 |
Little width burning horizontal output | Cd 02 33kx630 | Itan,Parelhas,Rio de Janeiro | |
TOSHIBA |
UNIVERSAL 14
UNIVERSAL 14 |
Does not turn on, intermittent | Capacitor c 887,ou d 840 | Itan, Parelhas,Rio de Janeiro | |
TOSHIBA |
UNIVERSAL 14
UNIVERSAL 14 |
When it turns on it kills the power supply | Diode d 302 or vertical output shorted | itan,parelhas,rio de janeiro | |
TOSHIBA |
UNIVERSAL 14
|
No video | Transisto q 405 replace | Does not send 9v | itan,parelhas ,rio de janeeiro |
TOSHIBA |
TV 1451
U18 |
Ghosting or interference in the image | Dirt in the micro sector | Wash the micro section with isopropyl alcohol (can also be used for other models) | ANTONIO NOBREGA [PATOS.PB] |
TOSHIBA |
2121NFS
U18 |
Attention guys, this TV has a dark screen with normal sound and gives the impression that the defect is in the abl line, but on pin 27 of the micro the voltage is normal 4.7 volts when I enable the blue screen it turns into a blue screen . | Defective eeprom memory. | Replace it on the standing sign. I hope I helped, have a good night everyone. | |
TOSHIBA |
TV2083FAV-U11
|
Doesn't start | Reg. q801 / str-f5653 | Replace the regulator | eletronicaapolo |
TOSHIBA |
TV 2999 JMS
LEM6 |
Does not turn on and remains on stand-by | Defective internal reset circuit to the computer. | After checking the polarizing components of the computer's reset, clock and voltage circuits, replace the computer and the defect was eliminated. | fastecel |
SEMP TOSHIBA |
TV1484 -G AV
U12 |
Plug it into the socket and it turns off | Resistor in power supply r863 open | ||
TOSHIBA |
TV-2889
|
Reduced vertical with contrast lines | Without 13v voltage on pin 2 of the vertical output c303 2.2 mf 50 v dry | Substitute | Igtec |
TOSHIBA |
2998EMS
CHASSI LEM 2 |
The power starts to oscillate, the fly back lights up the filament but before the image comes on the TV goes to standby mode | Ic 501 tb1275n | José gusmão |