Toshiba Repair Tips
Search: toshiba
Results: 5591
Results: 5591
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
TOSHIBA |
TS147/TVC100++
|
No sound and image out of tune | L201, l105 e r606 | ||
TOSHIBA |
TVC10IL
|
Inverting phase | Ic503 | ||
TOSHIBA |
TVC10IL
|
Lacks shine | Stack18 | ||
TOSHIBA |
TVC10IL
|
Lacks color or flashes | Crystal or touch up trimer | ||
TOSHIBA |
TS161/TS202
|
Varying the tune | Change q816 and q817 | ||
TOSHIBA |
TS161/TS202
|
Random channel change | Solder the memory cis directly to the board. | ||
TOSHIBA |
TS161/TS202
|
Retrace lines over the image | R911 | ||
SEMP-TOSHIBA |
TC-2084 ERV
|
When it heats up, the image turns bluish and disables | Remove jumper from 9v1ts line | ||
TOSHIBA |
DIVERSOS
|
Volume at maximum, without adjustment | D601 with escape (use tba120) | ||
TOSHIBA |
TVC102CR
|
Does not tune in, with drizzle | Solder plate da power supply | ||
TOSHIBA |
U17
U17 |
Dark image | C902 | ||
TOSHIBA |
2087
U12 |
Very bright screen with weak image in the background | Tr612 - no audio | ||
TOSHIBA |
U17
|
Vertical stretched at the top | Ic 421, 5 volt regulator | ||
TOSHIBA |
28W23B 11AK37
11AK37 |
St/by only - trips off at sw on | Loptx | ||
TOSHIBA |
28W23B 11AK37
11AK37 |
Service mode | Press "menu", then 4, 7, 2, 5 - to set geometry press green fastext button | ||
TOSHIBA |
28W23B 11AK37
11AK37 |
Dead - off with a bang | Ic800 pt no v30011968, q801 v30001386, c860 v30000107, d892, 896 ba159, r805 & 852 33r 1/2w, fuse f801 2.5a & check loptr bu2508af | ||
TOSHIBA |
28N23B 11AK37
11AK37 |
Return lines at the top of the image | C604 100µ 63v & ic601 fop chip stv9306 | ||
TOSHIBA |
28N23B 11AK37
11AK37 |
Dead without power supply output | Ic808 had no drive o/p pin 5 - chip faulty - comes with replacement r801 changed from 1k to 4k7 (kit pt no v30011968) | ||
SEMP-TOSHIBA |
TC-2084 ERV
|
When it heats up, the image turns bluish and disables | Remove jumper from 9v1ts line | ||
TOSHIBA |
DIVERSOS
|
Volume at maximum, without adjustment | D601 with escape (use tba120) |