Toshiba Repair Tips
Search: toshiba
Results: 5591
Results: 5591
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| TOSHIBA |
TVC102CR
|
Does not tune in, with drizzle | Solder plate da power supply | ||
| TOSHIBA |
U17
U17 |
Dark image | C902 | ||
| TOSHIBA |
2087
U12 |
Very bright screen with weak image in the background | Tr612 - no audio | ||
| TOSHIBA |
U17
|
Vertical stretched at the top | Ic 421, 5 volt regulator | ||
| TOSHIBA |
28W23B 11AK37
11AK37 |
St/by only - trips off at sw on | Loptx | ||
| TOSHIBA |
28W23B 11AK37
11AK37 |
Service mode | Press "menu", then 4, 7, 2, 5 - to set geometry press green fastext button | ||
| TOSHIBA |
28W23B 11AK37
11AK37 |
Dead - off with a bang | Ic800 pt no v30011968, q801 v30001386, c860 v30000107, d892, 896 ba159, r805 & 852 33r 1/2w, fuse f801 2.5a & check loptr bu2508af | ||
| TOSHIBA |
28N23B 11AK37
11AK37 |
Return lines at the top of the image | C604 100µ 63v & ic601 fop chip stv9306 | ||
| TOSHIBA |
28N23B 11AK37
11AK37 |
Dead without power supply output | Ic808 had no drive o/p pin 5 - chip faulty - comes with replacement r801 changed from 1k to 4k7 (kit pt no v30011968) | ||
| TOSHIBA |
215R8W
|
Out-of-frequency image | Tuner eng37107a | Sub capacitors 1μF 4.7μF 0.47μF | |
| TOSHIBA |
215R8W
|
Out-of-frequency image | Tuner eng37107a | Sub capacitors 1μF 4.7μF 0.47μF | |
| TOSHIBA |
SEMP U14
|
Dark vertical stripe | D418=diodo zener-12v /500ma. | ||
| TOSHIBA |
SEMP TV2084HAV U13
|
Image with sprinkles | C161 - (0,47uf/100v) | ||
| TOSHIBA |
TV-2070
|
Dark horizontal stripes and excessive brightness | C-446 33ufx160v seco | ||
| TOSHIBA |
TS-165
|
No image, no sound, drizzle | C116 (0,022 µf) | ||
| TOSHIBA |
16 IL
|
No Sound | R613 (8,2 k) | ||
| TOSHIBA |
16 IL
|
Dead | R414 (18 k) | ||
| TOSHIBA |
10 IL
|
Low volume sound | C-613 (1 µf 250 v) | ||
| TOSHIBA |
TS-201A
|
White screen defect with no sound and no image | Causes leaky or shorted c-116. | ||
| TOSHIBA |
TC-1470
|
All green screen with white traces throughout the image | Change ci 501 check the components connected to it as well. |