Toshiba Repair Tips
Search: toshiba
Results: 5617
Results: 5617
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| TOSHIBA |
20A82 EAV
|
It didn't work and after changing the fly-back the brightness varies. | Change components connected to the abl pin of the fly-back | ||
| TOSHIBA |
2987
|
With retrace line and turning off | The solution was a general resoldering of the tube PCI. | ||
| TOSHIBA |
TV 2998EMS
|
Flashing green | R512 | ||
| TOSHIBA |
TV 2998EMS
|
Flashing green | R512 | ||
| TOSHIBA |
SEMP TV2092LAV
|
Turning on and off | Diodo d448 | ||
| TOSHIBA |
2079FMS
|
TV doesn't turn on and the voltage above the horizontal output is high | 4r7 at r.864 | ||
| TOSHIBA |
SEMP 2070E
|
Oscillates gives a strong flash on the filament and cuts the oscillator | 1000/500v e d827 | ||
| TOSHIBA |
U13
|
Image looking like a lightning bolt in the center of the screen | Varicap | ||
| TOSHIBA |
TVC2082 EAV U6
|
Osd shaking vertically | C325 100uf 35v | ||
| TOSHIBA |
SEMP U14
|
Does not obey remote control commandsDoes not obey remote control commands | Sensor with dust residue | ||
| TOSHIBA |
SEMP U14
|
Inoperative, power supply does not start | R860 100k | ||
| TOSHIBA |
SEMP U14
|
Dead | Q 801 faulty (str w5753) or | ||
| TOSHIBA |
SEMP U14
|
Dark band at the top of the screen | C 308 100uf | ||
| TOSHIBA |
SEMP U14
|
Dark band on the left side of the screen | C 446 | ||
| TOSHIBA |
SEMP U14
|
Inoperative led blinking | R864 | ||
| TOSHIBA |
SEMP U14
|
No vertical scan | Ci q421 (5v regulator) | ||
| TOSHIBA |
SEMP U14
|
Altered vertical straightness | R336 changed or opened | ||
| TOSHIBA |
SEMP U14
|
Reduced height | C 306 | ||
| TOSHIBA |
SEMP TV2070E
|
Turns on and off apparently normal power supply | R824 (15k) open | ||
| TOSHIBA |
SEMP 2080E
|
Dead | Horizontal deflector |