Toshiba Repair Tips
Search: toshiba
Results: 5603
Results: 5603
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| TOSHIBA |
TS-167
|
The/ image and/ sound | C902 | ||
| TOSHIBA |
TS-147
|
Ripple in the image | C810 (240 µf 400 v) | ||
| SEMP-TOSHIBA |
TVC 206
|
Horizontal line | Q303 (2sb546a), q304 (2sd401a) e r330 (1,2 k) | ||
| SEMP-TOSHIBA |
TV 1470
|
Green screen with/white lines | Sikh01 (Tahtah 18N) (*X) | ||
| SEMP-TOSHIBA |
TS-207
|
Dead | C811 (10 µf 100 v) e r811 (220 k) | ||
| SEMP-TOSHIBA |
TS-165
|
No image, no sound, drizzle | C116 (0,022 µf) | ||
| TOSHIBA |
TV2093-JAV-U14R
|
St-by with 75v in the main power supply, and the hvcc voltage drops | Tr. dtc q880 | ||
| TOSHIBA |
TV 3488EMS
|
The horizontal drops and becomes out of synch, after warming up it returns to normal | C214-213 pino 38ci | ||
| TOSHIBA |
TV2016MMS
U17 |
Hoarse sound | Transistor q906 na pci do cinescópio | ||
| TOSHIBA |
U17
|
After a while it cuts the brightness, the filament remains lit and there is sound | Causa c418 no pino 10 do flyback | ||
| TOSHIBA |
U12
|
Blinking led | Zaddah | Replace zd873 from 5v6v to 6.2v | |
| TOSHIBA |
1470E
|
120v diode burns. | Diode 807 and 812 open | ||
| TOSHIBA |
TV 1482 BAV-U 10
|
Burning str f5653 | Cold welding at the power supply, check 680r smd r876 | ||
| TOSHIBA |
U16
|
Return line without sound and characters. | Diodo zener d412 10v. | ||
| TOSHIBA |
1449M
|
Changes channels by itself without stopping. | Ra15 (10k) open. | ||
| TOSHIBA |
TV1488
|
It takes a long time to turn on or doesn't turn on at all. | C887(100µ35v) and d887(fr104) from the power supply. | ||
| TOSHIBA |
2996S
|
When turning on, the voltage on the f803 reaches 150 volts, the TV oscillates and cuts out, passing to zero volts | C819 of 47/50 | ||
| TOSHIBA |
LC 15/2010Z
|
Power supply does not break | Check on the PCI main stage of the power supply if the electrolytic capacitor c356 is altered or has unsoldered terminals | ||
| TOSHIBA |
2070
|
Image reduced on the sides, and very dark. the 114 power supply only produced around 66 volts. | C 824 (3.3 uf x 250 v) shorted | Replace c824 | |
| TOSHIBA |
2998 LEM2
|
After turning on it stays on standby | Lack of mass at the emitter of transistor q402 | Solder ground connection |