Search: toshiba
Results: 5603
Make Model Symptom Problem Solution By
TOSHIBA SEMP SA566 MONITOR
No shine, after about 30 minutes on, it becomes normal 10nf/1kv c299 connected to pin g2
TOSHIBA SEMP U8
Power supply sometimes breaks C877 of 47u
TOSHIBA SEMP TS 206VS
Image with/ sprinkles See 14 (Aq.) Expulsion.
TOSHIBA SEMP TV14A82EAV
Dead C524, c182, c167, c517, c842, c210
TOSHIBA M-X41M VCR
Dead 100k r820
TOSHIBA TS-147
Doesn't start D403 open ijh62 - 470mf/16v c430
TOSHIBA TS-213ST
Turns off by itself after a few minutes of operation.normal power supply. X401 503khz
TOSHIBA TS-218ST
Jagged image when turning on C408 de 10mf/16v
TOSHIBA TV1476
Vertical closed Cold solders on tda3653 pins
TOSHIBA M-5530M VCR
No image C310 of 470uf/16v
TOSHIBA M-X40M VCR
Pause mode, the image shakes beyond normal Rakhaa D A Sak
TOSHIBA M-X40M VCR
Play speed in ep and sp mode above normal R598 de 10k
TOSHIBA M-X40M VCR
Does not record, only plays R222 the 10k
TOSHIBA M-X40M VCR
Does not record audio, normal image R715 de 10k
TOSHIBA M-X40M VCR
Plays without color only NTSC tapes 10nf/50v capacitor CV19 on the decoder board (pin 03 of ICV04 TA7347)
TOSHIBA TV-2080
Reddish screen without contrast C511 10k/50v.
TOSHIBA TV-2080-E U5
Dead R802 de 330k
TOSHIBA CF20C40
Does not light Burnt standby power supply transformer.
TOSHIBA 2998ASU
Do not lower the volume under any circumstances (remote control and receiver)
TOSHIBA 2080 EAV
Vertical closed +b voltage is missing on pin 6 of ciq303, c323 leaky, broken q501, open r35 trimpot, or defective yock