Cce Repair Tips
Search: cce
Results: 4816
Results: 4816
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
HPS2071A
|
Dead power supply | Replace o ic801 tea1533at, r812 0.22,q801 tpf6nk90z | julio.sertemaq | |
| CCE |
HPS2071A
|
Dead power supply | Ci do vertical , la78040 | julio.sertemaq | |
| CCE |
HPS2004B
|
LED flashes quickly, has +b and TV does not turn on. with some noise at the power supply | Capacitors c806, c807 (4.7u/100v) and c812 (47u/25v) | Replace capacitors | Eletrônica Staub |
| CCE |
HPS2780
|
Horizontal output transistor burns | Check c401 | Edson - SP | |
| CCE |
TVS2910
|
Television burned by lightning has current in the +b and LED is off | Exchange diodes d808 and d812 in the power supply | Oh and just calling it was 100% | ELETRONICA AUTO TREVO |
| CCE |
HPS2991FS
|
When connecting to the network, the chopper keeps ticking, ticking, and the LED lights up after a while and when turning it on, the power supply keeps arming and disarming. | Swap c806 and c839 (104k and 471) ceramic. | joaomvjr | |
| CCE |
HPS1497
|
Horizontal reaches to the side, shaking the image | C417 (330pf/2kv is in line with (hsyn) horizontal synchronism) | Barter it | MARCONDES LIMA,Jaicós-PI- Brasil |
| CCE |
2781/2981
|
Vertical closed/no sound | Ic 502 la 7685 as irregularities | Replaced ci 502 la 7685; the TV was ok. | clayton |
| CCE |
HPS2071
|
Image darken | Capacitor c424 de 47n | seu nem eletronica | |
| CCE |
TLCD-32X
|
With a loud noise from the speaker | Resolder smd resistors on the amplifier part. | In my case it resolved. | ELTON DE CASTRO -EMBU DAS ARTES -SP |
| CCE |
HPS1401
|
Works well for a while and then starts turning off and on again, sometimes the sound is very loud | Exchange of: c722, c723 and ic 803 | NV ELETRONICA - VALDEMIR | |
| CCE |
HPS2092
|
I'm on standby | 8 v power supply falling from trt q802 | Zd 501 direct replace | fernado tj maçeio |
| CCE |
HPS1497
|
Does not work, power supply changed and pulsing at 200 volts, exploded capacitor c825 and c829 | 806 diode short-replace | LUIS | |
| CCE |
HPS1497
|
High secondary power supply 200 volts, electrolyte malfunctions. 33mf/160v and 47mf/160v | Cap 806 with leak in the power supply primer - replace it | LUIS-VIDEOSUL | |
| CCE |
HPS3407 FSC
|
Replace the same | C 816 with leak | Replace the same | fbio |
| CCE |
HPS 2171
FSF |
Does not work, standby LED blinks | Tda 9070 processor | Replace, note, you can put the 2071 TV that works | ELETRONICA CB ALVES, CACHORRAO |
| CCE |
HPS1402B
|
TV doesn't turn on and LED blinks on standby | Changing the photo coupler and the tl431 | julio.sertemaq | |
| CCE |
TV-29USP
|
Out of geometry on the lower side vertically stretched | See r401 | Monte Moriah | |
| CCE |
HPS2971
|
TV turns on, has video, no audio, doesn't tune in any channel; changing the memory seemed to solve the problem; that is, it tuned the channels normally; after activating any function, it deprogrammed everything again, appearing to be a memory defect; but it wasn't; and sometimes It even seemed to be the computer because the menu was in English on its own. | Replace the ci (ic 603) tda9855, which is defective and does not release the correct pulses from the sda and scl. | aelson(CUIABANO) | |
| CCE |
HPS-1497
|
It makes a noise on the flay back but it doesn't turn on, turning off the vertical power turns it on | Ci vertical (la78040b) | Barter it | MARCONDES LIMA,Jaicós-PI- Brasil |