Cce Repair Tips
Search: cce
Results: 4816
Results: 4816
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
HPS 2071
|
LED flashing quickly killing the 16v power supply | Ic 601 sound output tda 1517 | Replace | antonio nobrega(patos pb) |
| CCE |
HPS2070
|
When turning off the filament it did not turn off | Q704 bc 547 | After the replace it was normal | JOSÉ GUSMÃO |
| CCE |
HPS2070
|
No audio | Q 403 bc 547 with leak between emitter and collector | After the replace it was good | JOSÉ GUSMÃO |
| CCE |
2071
|
Hissing on standby sometimes yes, sometimes no | Sound output tda1517 | ||
| CCE |
HPS 2071
|
Supply +b (103v) low. TV doesn't turn on. | The c 815 (2.7kpf/1k6v) was removed and the +b voltage was ok. | Roberto | |
| CCE |
TVS2910
|
TV turns on, less than 10 seconds later turns off by itself | Q805 (bc337) this transistor, when it heated up, remained open in the junction test | Replace | alisson tadeu |
| CCE |
HPS-2185
|
Power supply varying between 100 and 118v + or - | Replace r813 of 1 r | Reginaldo Resistronic | |
| CCE |
HPS 2003 D
|
Dark screen increased the scrin and gave a retrace line I changed the flay beck and nothing changed the socket and nothing | I changed the eprom and the image came back normal. | eletronica shalon | |
| CCE |
HPS 2991 FS
|
The channel change keys do not work, increase the volume and menu, it just turned on and kept the volume low | Volume key - faulty | Replace volume keys and those that replace channels | moroni eletronica |
| CCE |
TV2918USP/AV
|
Relay knocking TV on and off oscillates and cuts out | Capacitor c402 | Replace | EletroClaudio Aguas Belas Pe |
| CCE |
HPS2005
|
When pressing the on button, the LED turns off but does not turn on | Transformer t 401 close to flay bek | Replace it and that's it. | jcosme |
| CCE |
TVS2910FS
|
Closed vertical or FR423 heating | Transistor q802 and q805 leaky or open | klein | |
| CCE |
HPS 14S
|
Closed vertical | Open air resistor next to the fly back 1k r410 | Ricardo das antenas | |
| CCE |
HPS1471
|
Does not tune channels | Q 101 with leak | Changing the transistor q 101 | zapeletronica |
| CCE |
HPS2990
|
Contrast does not work | Resistor do abl r415 75k aberto. | Replace and go for a hug. | RAIO INFOSERVICE |
| CCE |
HPS21AVP
|
Turns off after hot and turns on again by itself | 118k precision resistor power supply position 816 | Replace r816 | johnny busnadiego |
| CCE |
HPS2198
|
Turns off after hot and turns on again by itself | 118k precision resistor power supply position 816 | Replace r816 | johnny busnadiego |
| CCE |
HPS-21AVP
|
List on one side of the screen | R414 (18k) e c4170 (330pf / 2kv) | Replace r414 (18k) e c4170 (330pf / 2kv) | johnny busnadiego |
| CCE |
HPS1405
|
Warm up the tsh until It's burning as if it was out of frequency, it was the yoke!! shorted | Changing the yoke or repairing behind varnish!! | orlando | |
| CCE |
HPS2971
|
Closed horizontal | C409 open or with low capacitance | Replace the 560nf /250v c409 | orlando |