Cce Repair Tips
Search: cce
Results: 4824
Results: 4824
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
HPS-21AVP
|
Image that wobbles. | Even though it would be good to change the resistor (r-813) of the 0.15r power supply | Ademar - Videira SC | |
| CCE |
VARIOS
|
Burning the power supply. | Check cold solders on the secondary diodes. | Ademar - Videira SC | |
| TODOS CCE |
TODOS
|
Change channels alone, or turn on or off | Change all control keys. | Ademar - Videira SC | |
| CCE |
HPS-1407-S
|
With sound but no image. | Replace tube plate resistor (fr-901) 22r | Ademar - Videira SC | |
| CCE |
HPS-1407-S
|
With sound but no image. | Change c board resistor | Ademar - Videira SC | |
| CCE |
HPS 2918
|
Closing on the sides, and scratches on the screen | Troacar ( c 402 ) 330 pf x 2kv | Ademar - Videira SC | |
| CCE |
HPS 1471
|
When plugged in and touching any key, the LED flashes. | Q 402 replace it as it is broken (horizontal output) | Luis Pacheco | |
| CCE |
HPS2991
|
Has sound but no image | I increased the screen and found that the horizontal screen was closed. | S409 (394 EGP) | Eletronica Benedito (Dudi) |
| CCE |
HPS2971
|
A black stripe on the side and mirror image | Resistor r401 (18k) aberto | sonivideo Assistência | |
| CCE |
C320
|
Doesn't start | Shorted capacitor of 100nf x400v, 1k er15 coupler photo | eletônica strada | |
| CCE |
2910FS
|
Cushion or bowl effect | D415 wall460 | MARCIORVGO | |
| CCE |
HPS2991FS
|
TV with vertical closed and no sound when turning off, punching the speaker | When checking the vertical line I found a burnt 10r resistor, it is located in the fr423 position connected to ppin 3 of the flay back which rectifies in diode d409 | When changing the TV, the movie came back | heliomar eletronica em governador valadares minas gerais 33-30842033 |
| CCE |
HPS 21AVP
H2197A |
Shorted fuse | Identify the shorted capacitor (larger), I replaced it, it worked for half an hour and it shorted again, I replaced the diodes which were also bad and the short continued, what do I do now? | Ezequiel | |
| CCE |
HPS 2073
|
Turns on, after a few minutes it turns off, when trying to turn on again the LED starts flashing, the screen opens and the vertical screen is closed. | Fly back with loose hardware and changed q802(bc337). | Replace the fly and q802. | Rondinele_Campo Redondo/RN |
| CCE |
HPS 2073
|
Turns on, after a few minutes it turns off, when trying to turn on again the LED starts flashing, the screen opens and the vertical screen is closed. | Fly back with loose hardware and changed q802(bc337). | Replace the fly and q802. | Rondinele_Campo Redondo/RN |
| CCE |
TV-2118USP/AV
FBT |
Closing the screen on the right side with normal time | This model is missing the precision resistor r813 0r15r 1w | Add the r813 and go for the hug | hipereletronica service(marcelo maraial-PE) |
| CCE |
HPS2185
|
Turning off intermittent | Coil l402 | Replace or install a 1r resistor if you don't have one | carlosss |
| CCE |
HPS2907FS
|
Vertical with retrace at the top | Fr 423aberto | Replace | |
| CCE |
HPS2991FS
|
Turns on and off directly, the filament turns on and off directly | Fr431 open, d410 shorted | Replace fr431 ( 0,47Ω) e d410 ( ske4f 1/06) | Ailson |
| CCE |
HPS 1471
|
Plug it into the socket, the LED lights up: when you press any key, the LED flashes but does not turn on | Q - 802 e 804 (bc - 337) | Replace the same | BARRETO CRUZ |