Cce Repair Tips
Search: cce
Results: 4824
Results: 4824
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
HPS 2783 D
73070.11 |
Retrace lines at the top of the screen | Vertical defect, the image is normal but with lines on the top part of the screen | paulo | |
| CCE |
HPS 2971
|
Image has interference in the vertical part | R 303 of 150 r open | PINDINGA | |
| CCE |
HPS 1403
|
Doesn't work | After checking the +b of the secondary, it was found that the power supply was missing from the horizontal driver transistor (q 401) | The capacitor (c 410) of 100pf was found to be shorted, just replace it and that's it. | Ademar Videira sc |
| CCE |
HPS 2971
|
Does not support remote control | Memory | ||
| CCE |
HPS2171FSL
|
Starts and returns standby r 423 warming up on the abl line | Fly bek | edezio eletronica | |
| CCE |
HPS 2971
|
Image flickering slightly | Sg902 on the kinescope board | Replacelo | antonio nobrega(patos pb) |
| CCE |
HPS1403
|
It turns on normally without a signal, when you insert the antenna or DVD the device turns off. | Bad kinescope | valmirgold | |
| CCE |
HPS 2185 FS
|
No picture, normal sound | Flyback married and changed capacitor 473 (47k,250v) | Replace capacitos 424 (473k) | Eletrônica Barros |
| CCE |
TV 2118 USP/AV
|
It doesn't turn on just by hitting the relay - | Tv had the r414 and c430 toasted and the dz807 with escape 8v2 | Replace them and run for hugs, thanks friends | |
| CCE |
HPS 2991FS
|
Little high voltage, normal power supplys | 0.39/250V open capacitor c409 | Replace | jasvan souza |
| CCE |
HPS2971N
|
Mirror image | Modified filament coil | Janpear the coil was beautiful | sidney valentina |
| CCE |
HPS 2991 FSF
|
The LED turns on and it doesn't turn on. | Capacitor 825 ( 100uf/160v) | Replace the same. | BARRETO CRUZ |
| CCE |
HPS2071
|
Turns on and then turns off | Replace q802 e q804 | ELETRONICA AUTO TREVO | |
| CCE |
HPS 2185 FSE
|
Green stand by LED flashes very quickly and does not turn on | Replace ic 601 tda 1517 | Osires | |
| CCE |
TVS-2910
|
Image closed on both sides | Q406 | Eletronica Benedito | |
| CCE |
HPS 2003
|
No image | No image, with retrace lines | Replace the fr 901 22r resistor on the tube plate | Ademar / Videira s.c |
| CCE |
HPS 2071 FS
|
TV works but only with drizzle, see tsound is 33volts on pin 9 of the varicap and the zener 33volts is good, the varicap is also good, symptom when programming the tuning was running the entire scale and not registering even one channel. | Cause of the defect q101=bc337 which has the emitter connected to pin 7 which is 5 volts and the collector which is supplied with 12 volts, all altered, due to being in the middle of the hot glue. | Q101=bc337 was replaced and programmed beautifully. | Armando de Olimpia Eletrnica EvoluSsom. |
| CCE |
HPS2991
|
Does not turn on LED off power supply with 65 volts and noise in the speaker | After checking coupler photo, tl 431 and c.i. from the power supply, after analysis I found q808(smd)bc846 short | After changing it, when turning on the main switch, the LED came on and the secondary power supply stabilized at 135 volts. I turned on the power and the TV worked perfectly. | JOSÉ GUSMÃO |
| CCE |
HPS 2080B
|
Burning str50103 | Replace d105 | Pablo | |
| CCE |
HPS 2004B
|
Image shifted horizontally | Solda fria no ic 503 (tda 8841) | Solve or ic tda 8841 | SAVIO VIDAL |