Cce Repair Tips
Search: cce
Results: 4816
Results: 4816
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
HPS 2981
|
Normal video, without audio | After checking the sw 601 key was facing ext r and l, just turn it towards i (opposite side). | Pacífico | |
| CCE |
HPS2171
|
I'm sound | 470 microx16v capacitor (shorted) that decouples the power supply from the volume IC, see if the resistor is ok. | Replace it and maybe the volume ci | warley cesar |
| CCE |
TV-2118UBP/AV
|
Cushion effect | Open 82k r428 | I just replaced it and it was ok | passos |
| CCE |
TV-2118USP/AV
FBT STD |
Image shifted to the left part of the crt (black band) | C417 330pf 2kv ceramic disc broken | Replace c417 | leitemarcellus |
| CCE |
HPS2997
|
Vertical closed | 54v fusistor open because tsound is cold solder on the vetical output | thiago eletronica atl | |
| CCE |
HPS 2991 / 2997
|
Blurred image without sreem and cuts sound | Replace (r-423) (r-424) and (c-421) | Ademar / Videira sc | |
| CCE |
HPS-2991
|
Turn on and off | Replace transistor q802 e q805 | Ademar / Videira sc | |
| CCE |
TV2118USP
|
With white stripes and three bands in RGB colors in the horizontal direction (at the top of the trc.) | C312 de 100uf/63v | Antonio | |
| CCE |
HPS 2080B
|
Burning str (50103) | D - 205 | Replace the same. | BARRETO CRUZ |
| CCE |
HPS 2070S
|
Doesn't start | Capacitor de poliester (490n/250v) | Replace the same. | BARRETO CRUZ |
| CCE |
HPS 2070S
|
No image | Tda - 8361 | Replace the same. | BARRETO CRUZ |
| CCE |
HPS-1497P
|
Does not turn on, stand-by LED flashes with noises from the power supply transformer | Capacitor c-805 | Power supply capacitor c-805 zeroed | Eletrônica Pauly |
| CCE |
TV1418USP
|
TV turns on and then turns off after a few seconds | Power supply regulator. Note: the regulator heats up a lot until it turns off. | Dedley | Rogerio Souza |
| CCE |
TV-1418USP
|
Closing on the left side of the horizontal screen.change c430/222k/1kv c417/331/2kv | Replace c430 and c417. | JN ELETRONICA NEVES-CE | |
| CCE |
HPS-2991
|
No current on the screen, or with just a little voltage when you touch the screen potentiometer | Seems to be the bad fly back, or the tube | Check the r-423 is close to the vertical output (1k) | Ademar / Videira sc |
| CCE |
HPS2901
|
The LED does not turn on or light up. | Replace the 18 V zener that was leaking. | joosias | |
| CCE |
HPS2988
|
Does not turn on, stays on stand-by | Horizontal transistor power low | Replace c 825 de 100μF 160v | MARCIO ALVES |
| CCE |
HPS-2197FS
|
Turning off @@@ | I replaced the bc337 and caps. high voltage filter and nothing. the defect was the col pin of the flay cold solder resolders all pins ok | Help yourself leave your tip | ELETRONICA ARNI/L.LEAL-SC |
| CCE |
21AVP
|
Does not tune in to any channel | A eprom c 2404 | Replace for another but you have to program it | eletronica pai e fihos |
| CCE |
D3201
STILE |
Power supply inoperative - replacing ncp1607b with fan7530 | Ncp1607b hard to find | Replace with fan7530, remove capacitor pin 2, connect 47k resistor to ground on pin 2, connect 47k resistor to pin 2 at the junction of r1 with the return transformer. | Rubens - Videotele |