Philco Repair Tips
Search: philco
Results: 4811
Results: 4811
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO |
PH21B
|
Turns on and off then, the power supply voltage goes up and then goes down. | Cause: defective photo coupler | klein | |
| PHILCO |
PSC2976
|
Power supply arms and disarms, filament turns on and off. | Capacitors wide =c715 ,c730 semi-short. | gugu eletronica | |
| PHILCO |
TP1454
|
Doesn't start | Starting normally but secondary +b output with only 26v | Replace d912 | LOU |
| PHILCO - PLATINUM |
TPS-2062N
|
Power supply does not release +st-by LED does not light | R-903 470k changed and the +b setting, which had a voltage of 90v, I adjusted it to 100v and the TV started working again, everything was ok. | Wislen Alves | |
| PHILCO |
PH21B
|
LED blinks and turns off | R552 100k changed | DIGITAL TEC | |
| PHILCO |
TP2054
|
Turns on and off then test: turn off the horizontal part of the coil the TV works | Change c715-730 with leakage. | Elias2305 TO. | |
| PHILCO |
PCM-2044-6
CCCCC |
Hiccuping with blinking LED not starting | Does not oscillate | Redo the tracks from t702 to r703 and c709 to t702 with wire okreplace c709 | ANTONIO DOS SANTOS LIMA |
| PHILCO |
PCM 1443 EMOTION
|
TV with no picture, no sound, screen drizzling even with an antenna. | Solution: replace 2k.7 resistor 201, which connects to the tu-oo2 pin a g c . open resistor. | BARRETO CRUZ | |
| PHILCO DVD |
PM190
|
Doesn't start | Diode zenner zd1 5v6 | Replace diodo zenner zd1 5v6 | johnny busnadiego |
| PHILCO |
TP2920
|
LED does not turn on | Change cap. 1000x16v at power supply | Cap. 1000x 16v fonte | ELETRONICA MAURI JUNIOR |
| PHILCO |
TP2054
|
TV starts working + no image appears. waiting about 5 seconds. appears with a smooth screen, with vertical and horizontal lines wanting to close. | Change the cap. 6n8 x 2kv. which has a low value. (5n6 x 2kv) | ROBERTO PINTO | |
| PHILCO |
TPF2922
|
Normal league, with horizontally expanded image | The dz1701 was replaced | ROBERTO PINTO | |
| PHILCO |
TPF2922
|
Sometimes it turns on, sometimes it doesn't. When it turns on, it has a black stripe at the top and bottom, with excess red in the image. | The precision resistor r725 was replaced and an adjustment was made to the flyback screen | ROBERTO PINTO | |
| PHILCO |
PC1443
|
Vibrating t901 (power supply buzzing), not having high voltage. | C921 to power supplys. | C291 de 22n/50v | Ademir tc |
| PHILCO |
PCM2044
|
Doesn't catch any channel | Ceramic capacitor | Ceramic capacitor on pins 42,43 and 44 responsible for inputting vhf,μHf and vl signals | WILLIAN8952 |
| PHILCO HI |
PC1442
|
No sound normal image | C420 shorted | Replace | EletroClaudio Aguas Belas |
| PHILCO |
PH200
|
Inoperative, only blue volume LED on! | Open smd l4 inductor | Replace l4 for another... | pfa |
| PHILCO |
TPF2121F
|
The TV only turns on by pressing the power button on the panel, that is, it does not turn on with the control. | Defective sensor, position ir1101 which is on the plate on the front panel of the TV, sensor rpm-693b. | It was replaced for an identical one and it looks great!... | Armando de Olímpia |
| PHILCO |
TP-2052N
|
Dark screen with no image and with normal sound when the screen increases, a torch appears like an arcuires | Defective vertical output tda8356 | Replace | EletroClaudio Aguas Belas |
| PHILCO |
PCM2044
|
Poor convergence, in the image and characters, and heating up r711 | Oxidized deflector coil | Replace deflector | PALAURO |