Philco Repair Tips

Search: philco
Results: 4811

Make	Model	Symptom	Problem	Solution	By
PHILCO	TP2053	Power supply does not oxidize	Tsound was no 11 volts on pin 14 of the ci 901's vcc and tsound should have been 11v on pin 2 of the ci 901 in staby, c 917 and c 907 smd with leak		BRUSKE
PHILCO	TP2054	Power supply does not oxidize	Tsound was no 11 volts on pin 14 of the ci 901's vcc and tsound should have been 11v on pin 2 of the ci 901 in staby, c 917 and c 907 smd with leak		BRUSKE
PHILCO	PH14D	Completely inoperative power supply stopped	Q801		carlinhos100
PHILCO	PCS2976	Cut-off tube	After changing the tube, flyback, and vertical output it worked without sound	Replace eeprom	ÁdrianChapadãodoCéu
PHILCO	PCS2952	Dull, bright when turned off	Screen voltage was very low even when measuring directly on the wire, with it disconnected from the board	Changing the tube socket, which, if it leaked, killed the focus voltage and the screen on the fly	jasvan souza
PHILCO	PC1442	White tla with retrace	Zd 304	Replacement	This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILCO	TV PH21E	Does not turn on, LED flashes, +b with 20v	Changed power supply	R839(82k) replaced to 100k	CABESSÃO NATAL
PHILCO	PCM1444	Turns off after some time	C719 capacitor replacement		LOU
PHILCO	PH21B	Turning off in seconds	High power supply, 180v. rgb with 230v.	R552 from 100k was replaced to 120k, just replace it!!!	gmcmaster10
PHILCO	PCS2976S	Inoperative, it exploded, according to the customer	Fusel, q901 party, d902/903/908 and ci 901		Krul
PHILCO	1444/2044	The LED just blinks, it doesn't turn on, tsound is only 16v in the 20v power supply	C708 22n with leak	Just replace the capacitor	Paulo Sertel Itararé SP
PHILCO	1444/2044	Horizontal fallen	C 709 and c707 with leak	Just replace the capacitors)	Paulo Sertel Itararé SP
PHILCO	TPF2130	Does not turn on LED off	C906 open	C906 replace	ELETRONICA MAURI JUNIOR
PHILCO	PCM 2044	Normal image, but tsound was a vertical black stripe on the image	C709	Capacitor 0.01mf 400v polyester with loss of capacitance	luizandradina
PHILCO	TP29C21	Agc, only with 28 on the varicap pin	Varicap	Replace the varicap	imagem sat eletronica
PHILCO	TV PH14	It doesn't turn on and if you release pin 64 of the ic201, it turns on without an image	Replace eeprom memory		klein
PHILCO	TP E PCS	LED just blinks and doesn't turn on	+12v diodes, or -12v shorted	Check 0.47Ω diodes and r910 r912	jasvan souza
PHILCO	TP1453-1454	Leaky ir101 remote receiver	+5v only with 2v	Leaky ir101 remote receiver	jasvan souza
PHILCO	TPF2130	Doesn't start	Sem +9v no pino 39 do ic101	R931 open, or unsoldered	jasvan souza
PHILCO	TV2091JAU U14	Output horz heating	C 419 47uf	Replace without testing......good luck!!	Jhone eletronica