Philco Repair Tips
Search: philco
Results: 4811
Results: 4811
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO |
PC-1439
CPH-04 |
No sound normal image | R 405 aberto 220k | juci | |
| PHILCO |
PH21USA1
|
Vertical closed from the middle up | Saida is vertical | Replace | EletroClaudio Aguas Belas |
| PHILCO |
PCM 1453
|
Dead contrast, no contrast | I will replace the open 716 resistor | Sebastião Nedina | |
| PHILCO |
TPF2121F
|
Dark screen with a line at the bottom of the screen | Defective vertical outlet | ciçu | |
| PHILCO |
PCM1451
CP06 |
Starts to oscillate and cuts | Check r941,r942,r943 and zd941=30v | eletronica newtec | |
| PHILCO |
PCS-2956
|
Does not turn on, power supply disarming | Capacitor c 921 | Remove the same | ladmyr |
| PHILCO |
TP14U56
|
Philco tp-14u56 (service mode) (solved) | Press menu and vol+ simultaneously - plug the power cord into the socket and wait 5 seconds - release the keys and press the power key - when the TV turns on press menu and it will be in service mode. | EletroClaudio Aguas Belas | |
| PHILCO |
TP14U56
|
White screen with lines of retractions | R714 4r7 1 in | EletroClaudio Aguas Belas | |
| PHILCO |
TP-2052
|
Turning off intermittent | Instability (voltage drop) on the 5v line of the micro | C102 - ceramic smd next to the micro on the 5v line | Edil |
| PHILCO |
PCM-2144
|
Vertical doesn't open all the way, lacks height | R601 680k changed | Replace | deuner |
| PHILCO |
PCM-2144
|
Vertical doesn't open all the way, lacks height | R601 680k changed | Replace | deuner |
| PHILCO |
TP2010
PCI 016 |
LED lights up but when turned on LED blinks and lights up again | Cold weld no r936 | Valmon | |
| PHILCO |
PCS 2956
|
When turned on, it only activates the relay but does not trigger the horizontal oscillator. | I removed the q707 from the protection line and the TV went off. | ||
| PHILCO |
TP2053
2053 |
The LED doesn't turn on and the power supply doesn't start | Q903 short | dedesom diogo lopes | |
| PHILCO |
TP1452N
|
When turning on the LED goes off for a second and comes on again, the TV does not turn on. Tsound is no sign of generating, power supply ok. | Protection circuit that goes to pin 29 of the micro (ci 101). They are: d941, d707, d706, r941, r942, r943 and r718. | In my case it was the zener d941 (30v) it was good with the multimeter, but it showed a high leakage when heated with a welder. | Manoel (Noca) |
| PHILCO |
1435
CPH03 |
Vertical closed, vertical output and oscillator good, nothing opens. | Check r684 on 14" is 8k2 | Master Eletronica | |
| PHILCO |
TP20V56
|
Vertical closed and the TV turns off in seconds | Ceramic capacitor c614 - replacement is necessary, not removal | C614 ceramic capacitor replaced | STUDIONAZA |
| PHILCO |
TPF 2121
|
Strong noise in the power supply driver transformer only in standby | Check c 930 smd at power supply | Master Eletronica | |
| PHILCO |
TP 1454
|
TV turns on without color, suddenly turns off and or turns on dark screen only characters sometimes it doesn't turn on and other anomalies | Check sda and scl line must have 5v each, if not, check c118 and c119 | Master Eletronica | |
| PHILCO |
PMC2044
|
Closed vertical and lack of synchronism | Ci601 tda3653b / cap.205 2,2/50v | Replace mentioned items | eletronicaapolo |