Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
FL2.16
|
No picture, sound ok. | Check ic7707 on ptp (tda6111q3y; 4822 209 33365). | ||
| PHILIPS |
FL2.16
|
No picture only txt and menu. | Check ic7395 (tda8443b; 4822 209 30394). | ||
| PHILIPS |
FL2.16
|
No picture after some time. sound ok. control works very slow. | Check ic7231 on lfr box (78l05; 4822 209 72042). | ||
| PHILIPS |
FL2.16
|
No colour after 30 minutes, pip not synchronised. | Check soldering of collector t7014 (bc858b) on digital scan box | ||
| PHILIPS |
FL2.16
|
No colors in tv mode | Check ic7365 (tda4650) on the ssp (4822 209 30837) | ||
| PHILIPS |
FL2.16
|
Negative picture | Check ic7207 on lfr box (sda9205-2; 4822 209 31056). | ||
| PHILIPS |
FL2.16
|
Modifications | Modifications ------------- only for 29" picture tubes: from production start onwards following items have been changed on the large signal panel: c2603 changed into 220nf (4822 122 32927) c2626 added 3,9nf, parallel to r3633 (4822 12 | ||
| PHILIPS |
FL2.16
|
Modification | Modification ------------ only for 25" during production in week 9405 the picture tube of the 25" sets has been changed from the a59eak252x43 (4822 131 20501) into a a59eak252x44 (4822 131 20602). this new picture tube is used in sets with serial number | ||
| PHILIPS |
FL2.16
|
Modification | Modification ------------ only for 29" picture tubes from production start onwards on the large signal panel item c2611 has been changed into 1 uf 50v (4822 121 51319). | ||
| PHILIPS |
FL2.16
|
Low frequency hum from subwoofer, buzz from right hand squeeter. | Check dc level on pin 1 and 9 of ic7011 (tda1521). if not correct, replace (4822 209 63913). | ||
| PHILIPS |
FL2.16
|
Low brightness txt and osd, picture ok | If this condition occurs, check the option codes. resetting the option code numbers as per the service manual provided the cure. | ||
| PHILIPS |
FL2.16
|
Jumping vertical picture. wrong colours. sometimes no sound. | Set is switching between pal-ntsc-secam. check soldering joints of t7119. | ||
| PHILIPS |
FL2.16
|
Jitter at ntsc reception. | Replace item 9459, connected to pin 13 of ic7400 on the lsp, into 220Ω (4822 116 52215). remarks : introduced in production in week 9335. | ||
| PHILIPS |
FL2.16
|
Jitter | In pip unit change the value of r3336 to 4k7. | ||
| PHILIPS |
FL2.16
|
In pip picture only white stripes. | No +12b supply. check r3345 (22Ω; 4822 111 41424) and ic7755 (tda2579b; 4822 209 63423). | ||
| PHILIPS |
FL2.16
|
Humm from speakers. menu vibrates. | Check d6551(llz-c5v6; 4822 130 80954). | ||
| PHILIPS |
FL2.16
|
Hum in loudspeakers | Check audio ic7011 (tda1521aq; 4822 209 63913). | ||
| PHILIPS |
FL2.16
|
How to enable/disable "child lock" | Press "menu" button on remote control. when the menu appears on the screen, you select "special features" (this expression is language dependent) within "special features", the "child lock" can be enabled or disabled. | ||
| PHILIPS |
FL2.16
|
High squeaking sound from set. | Check l5522 (linearity coil; 4822 156 50107). | ||
| PHILIPS |
FL2.16
|
Green screen. no pip. txt/menu, sound ok. | Check ic7207 on lfr box (sda9205-2 a/d convertor; 4822 209 31056). |