Philips Repair Tips

Search: philips
Results: 14245

Make	Model	Symptom	Problem
PHILIPS	CP90	Function knobs on ctv fail	Voltage + 4,9 v on pin 42 ic 7840 present. oscillogramm on pin 31,32 present. replace ic 7840 (tmp47c432p-8188; 4822 310 31849). important: mount the metal-shielding with earth to bridge 9732 (tmp47c432p-8189; 4822 310 31851)
PHILIPS	CP90	From cold will come on if warm will not start up	D6670 ( in4418 )
PHILIPS	CP90	Frame collapse - with small scan below it.	Crack in print by r3275.
PHILIPS	CP90	Focus fluctuates	Tr5763
PHILIPS	CP90	Fluttering pic - ht normal	C2638 470µ 16v in 13.5v supply or check elect caps in if can
PHILIPS	CP90	Flasing/lines on pic when cold	Dry joints if module - esp the chips
PHILIPS	CP90	Field scan very low ( 1/2 inch )	Raakhdhi A. A. Ahm
PHILIPS	CP90	Field collapse with bright line across screen	R3623 8r2 in 163v supply o/c
PHILIPS	CP90	Field collapse - small amount of scan below	No 95v to fop stage - crack in print by r3275 or r3582 3r3 o/c
PHILIPS	CP90	Field collapse 2. poor contrast	R3623 8r2 oc 2. preset r3944 5k oc
PHILIPS	CP90	Field collapse	R3623 8r2 o/c in 163v line from loptx
PHILIPS	CP90	Field collapse	R3623 ( 8.2Ω ) 163v supply
PHILIPS	CP90	Field bounce	Tda2579 timebase gen chip
PHILIPS	CP90	Dull pic when connected to normal mains - ok with isolated supply	Crt rimband come adrift
PHILIPS	CP90	Does not start by using remote control	Transistor 7730. better memory battery 1901, 2,4 v- code 4822 138 10313.
PHILIPS	CP90	Does not function	Voltage +95 v not present check/replace ts 7677 (but 11 af; 4822 130 42679), check/replace ts 7673 (bc 547; 4822 130 44257) and ts 7674 (bc 328; 4822 130 44104) and replace d 6674 by byd33j (4822 130 42606) check/replace ts7727 (bc556;
PHILIPS	CP90	Dead.	R3668 ( 15r ) o/c.
PHILIPS	CP90	Dead.	C2695 ( 2.2nf ) , d6695 s/c.
PHILIPS	CP90	Dead.	C2679 ( 1nf 2kv ) , d6679.
PHILIPS	CP90	Dead.	1.6amp fuse o/c , check for drys on loptx ect.