Philips Repair Tips
Search: philips
Results: 14206
Results: 14206
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
26PFL3404/78
|
One of the colors in cvi is missing or has an irregular color | Cold welding ci u4201 | sim tv | |
| PHILIPS |
26PFL3404
|
White screen and no image, but it had sound. | Bad contact on ci u1 of the t con board, and bad contact on the flat cables. | sim tv | |
| PHILIPS |
26PFL3404
|
Without image and with audio | Inverter power supply | sim tv | |
| PHILIPS |
26PFL3404
|
Vertical white streak on the screen | T-con board connector | sim tv | |
| PHILIPS |
26PFL3404
|
Does not turn on or intermittently turns off | Poor contact in the t803 solders | sim tv | |
| PHILIPS |
26PFL3404
|
It turned on, sound and image normal, after a minute on, it turned off. all normal voltages, pfc=390v | Ci ic901 tny277pn | sim tv | |
| PHILIPS |
26PFL3404
|
It turned on, and worked normally, but sometimes it turned off. without apparent cause | 5v supply varying, due to the high heating of the tny277pn ci | sim tv | |
| PHILIPS |
26PFL3404
|
Displays factory information. | It was in store mode. change to home mode. | sim tv | |
| PHILIPS |
26PFL3404
|
Turns off after approximately 4 minutes. | Ic901 tny277pn | sim tv | |
| PHILIPS |
26PFL3404
|
Back light does not come on | Inverter transformer | sim tv | |
| PHILIPS |
26PFL3403D/10
TCM2.0E LA |
Mains led comes on and goes off immediately (you hear the relay switch on) 5 v of power supply | Ic1- viper22a | sim tv | |
| PHILIPS |
23MW9010/37
LC03.U AA |
I'm sound | Sound output ic7731, (an7522) | sim tv | |
| PHILIPS |
22PFL3017
|
Doesn't work, test the power supply. | See photo | sim tv | |
| PHILIPS |
20PT529
|
Either it turns on or not. power supply with zero volt at +b 95v | Optocoupler | sim tv | |
| PHILIPS |
20PF8945
|
Pink screen, with or without image. | Check FET 7954 (LCD display VCC pan power supply) and components connected to it | sim tv | |
| PHILIPS |
20PF4121
LC4.1E AB |
With sound, without image | Capacitor ce06 and ce07 both 1000µF on the power supply board (PSU). | sim tv | |
| PHILIPS |
42PF9631
BJ3.0E |
Without sound and image. turns on and flashes for 1 or 2 seconds, relay turns on and off LED remains green | Check crystal 27mhz | sim tv | |
| PHILIPS |
FWC270
19 |
No sound good output, slight hiss | Transistor smd 7606 | Remove and test the sound should come out without it | matrix10y |
| PHILIPS |
40PFL6606D
S L11M1.1L LA |
Doesn't even turn on the LED | Keyboard | I removed the cable from the board and it started working again, I cleaned it with isopropyl alcohol and it resolved | Eletrônica Ômega |
| PHILIPS |
42PFG6519/78
|
Stuck on logo and inverted image | Replace a pci principal | Type 062598 + menu (box) + screen code (back cover) if it turns on with inverted image type menu (box) + 1999 + return on the control, replace the flip panel option to off or vice versa. | Marcelo-Birigui/Sp Eletronica Audio e Video |